A few more photos. Clearly I could have cleaned her up a bit. At the time I didn't think I would try to sell her.
It is the Deep V model and those are 12x24 tabs.
My kids seem to be getting bigger and the boat stays the same. As much as I love this boat I think we need to move up. It is the classic 2320 hull with no alterations so all the features we love are there. This boat has been well cared for and is in great shape for a 1997. It has a solid...
It is off a yamaha 300 HPDI and is in great shape. Much cheaper than adding bigger tabs.
http://www.permatrims.com/M9_Grey_Perma ... stroke.htm
it is listed as one for a 2 stroke though I'm not sure there is a difference.
$75 + shipping? Make an offer. Its collecting dust.
For what it is worth I just mounted 12 x 24 tabs on mine upgrading from 12 x 12's. I used the same actuators in the same locations but drilled two new holes in the tabs two so the actuators are 2 in of the center of the tab. I used two of the existing holes and added 2 if that makes sense...
Well the Yamaha guys see nothing wrong with the engine. I have ordered 12x24 tabs for the back. A closer look and measurement puts the cavitation plate 2 inches above the keel of the boat. It is set back 24 in so I guess that sounds right.
any thoughts are welcome. Thanks to all
Thank you. Be boat is in getting winterized now at the yamaha dealership so I will ask.
Any insights on what might make it loose power?
Does the engine sound like it is near the correct height?
Thank you for the thoughts. It seems to me the boat should fly. The cavitation plate is flush with the keel of the boat when looking from behind out of the water. That makes sense to me but I have never had a motor out on a bracket. Should it be higher than that?
I am going to go the...
This forum is great thank you to every one out there helping out.
I have a 97 2320 with a 300 yami hpdi and a 20 hp kicker. The boat has stock tabs and a perma trim on the motor and has a mirage plus 17 ss prop. It tops out at 5400 rpm at 36knots with one person and empty fuel. Loaded up it...
I know its not a parker but I now have a 2320 and need to sell this one off to get out of the hole a bit.
1973 20ft SeaCraft. 2005 Johnson 150 HPDI. 2001 trailer. It pains me to let this boat go, as it has loads of time and money invested and these boats are incredible. I bought a larger...
Thank you all for you help with this. I went with a 2320 with a hard top over the back and a bracket. It is an awsome boat and I love the flush deck of the 2320 over the 2310.