OK,
I took a piece of string and taped it to the keel.
I leveled the string out the best I could and stretched it pasted the lower unit.
I then put a piece of painters tape on lower unit at the line.
SEE photo.
My Cavitation plate on the G2 is 2inches up from keel string.
From the dialog this...
Current my boat is on a lift.
I did place a 8ft stick from the bottom of v to the lower unit.
The cavitation plate is about 2.0 to 2.5 inches above.
I will have to eventually put back on trailer,but before I do I probably need the dealer to ride with me for demo.
The reason I thought that...
I talked with a bracket dealer and he said the engine cavitation plate should be at least 3 inches above bottom V of boat.
I guess this is due to the distance back from transom.
Evinrude will not talk with me?
I just purchased a 1994 Parker walkaround with a 2015 Evinrude G2 250HP with very low hours.
The boat has the closed transom with SS bracket.
A local dealer installed the motor.
When the boat is on plane it performs good.
When the boat is running below plane but above about 8 knots (plowing as...