Changed oil tank bracket and fuel separator to stainless....

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

scalywag05

Well-known member
Joined
Mar 6, 2009
Messages
150
Reaction score
7
Location
Long Island NY
after 14 years it had enough.......
also changed all 3/8 fuel hose from the tank to the primer bulb..... (hose was in very good shape though from what i could see)
Luckily Parker used all stainless harware from the factory so everything came out easily....
 

Attachments

  • IMG_3189.JPG
    IMG_3189.JPG
    37.7 KB · Views: 274
  • IMG_3195.JPG
    IMG_3195.JPG
    26.7 KB · Views: 274
  • IMG_3239.JPG
    IMG_3239.JPG
    33.2 KB · Views: 274
  • IMG_3241.JPG
    IMG_3241.JPG
    28.5 KB · Views: 274
where did you get the stainless water separator bracket from?
 
Just a FYI:

Don't see any pix's of it.

The primer ball goes between the tank and the filter...... Not between the filter and the motor.

This helps fill the filter fast when a fuel filter is being changed.

A ON/OFF valve should be at the inlet of the filter mount.... or before the filter. Thats so it does not siphon when doing a filter change.

Date you filters with a Sharpie....Change them once a year.....Not in hours. Time will rust a filter.
 
warthog5":3g43zusf said:
Date you filters with a Sharpie....Change them once a year.....Not in hours.

Yep.
 

Attachments

  • IMG_4493.jpg
    IMG_4493.jpg
    4.4 MB · Views: 237
Back
Top