Removal of the tell-tail

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Old Salt

Well-known member
Joined
Mar 12, 2010
Messages
67
Reaction score
0
Location
Bucks co.
Hello Captains, I have a problem. I'm trying to remove the tell-tail because it has clogged up twice last season and the marina suggested that I have it replaced. So I looked it over an saw 6 bolts and two small hoses. I thought not to bad, yeah you guessed it, I didn't have a clue that there are wires involved. Here's the problem, there is a round cylinder that connect the green wires, how do I unconnected the connection? I also was wondering if this unit can be taken apart, cleaned out and put back together. Thank you in advance The motor is a 1996 Yamaha saltwater series, 250 hp.
 
It might help if we know the make, model and HP of the motor.
 
I should have know to include that information. It's a 1996 Yamaha saltwater series 250 hp. I'm trying to figure out how to post some pictures. Believe it or not i'm not new to this rodeo.
 
Back
Top