another trim tap question

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

THEGAME

Well-known member
Joined
Dec 13, 2008
Messages
200
Reaction score
1
Location
staten island ny
k guys i know this can go on for days. i want to know if any body put the 12 x16 tabs in replacement of there 12x12? i have twin 150 in the notch so I'm trying to stay away from the 12x18 i don't have much room back there thanks guys
 
I know that you were looking for first hand experience on this but in leu of that on my part I thought I would share this guide from Bennett. One thing on these that I don't see mentioned but I seem to remember reading is that if you go over a strake, you need to go past the edge of it by 2". So check that fact out if your will be in that situation. If you follow these guidelines, then I'm sure you will be fine with whatever size you go with. Good luck!
 

Attachments

  • image.jpg
    image.jpg
    223 KB · Views: 145
  • image.jpg
    image.jpg
    264.9 KB · Views: 145
Back
Top