2320 Bracket Plug

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MacGyver

Member
Joined
Jul 20, 2012
Messages
8
Reaction score
0
I have a 2003 2320 with the bracket. The bracket's plug is missing, so it fills with water...which is no good. Can anyone direct me to a source for this part? Part no.? Size/thread if its a standard?

Thanks...
 
I found a stainless steel bolt in a specially bolt and nut store. Hard to find that part


PLEASE! Do NOT do this!

You want a plastic plug to go in there. It's either 3/8in pipe or 1/2in Pipe thread.


The stainless will gawl and cause corrosion.... This will result in burbling and flaking paint or powdercoating.
 
I've had a PVC plug in for about a year and a half. Was there when I bought the boat. I believe it's 1/2". I've taken it out two or three times. I've never had leakage through the bottom plug.


Sent from my iPhone using Tapatalk Pro
 
It's nothing but a 1/2" pvc plug. You can grab one at any home center.


Sent from my iPad using Tapatalk
 
Look for Nylon......Like this

http://www.ebay.com/itm/1-2-NPT-Black-N ... Sw44BYZZG8

s-l500.jpg
 
Back
Top