Prop for a 23 dvsc with a 200hp ox66 2002

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Parker23

Well-known member
Joined
Mar 19, 2006
Messages
515
Reaction score
0
Location
NY
Got a black stainless yamaha prop 13 3/4 x 17 it only turns 5100 rpm on flat conditions, took to prop guy said he could only get about another 200rpm out of it engine calls for 5500 wot has anybody changed props and if so to what. Thanks
 
That's a small diameter prop there ...

I'd go to Overton's and buy a 15" pitch 3-blade Stiletto stainless prop and would try to get your RPMs to within 200 RPMs of max, with 1/2 - 2/3rds fuel and normal gear.

Boats only LOSE RPMs as the season progresses ... bottom paint gets dirty, boat gets heavier, you add more crap or fishing gear ['cuz that ain't crap ;) ], and ALL normally aspirated motors will lost up to 200 RPMs during the heat of the summer.

Best thing ... Overton's will SWAP that prop out until you get one that works for you. Oh yeah, you have a good prop guy there, as usually they can only dial +/- 100-200 RPMs from blades as is.
 
Back
Top