Snowman
Active member
2002 21se. During a recent fishing trip my live well pump quit. I connected the wires directly to a battery and the pump worked so I am not getting power. While I was tracing wires in the bilge area I lifted the float to the bilge pump and it did not come on. I tried to activate it from the console switch and nothing. I lift the switch on as I checked what wires I could easily access. I returned to the bilge and put my hand on the bilge pump and it was very hot. I assume I have two issues, one the bilge pump is getting power but the pump is probably dead (15 years old) and two, the live well pump is not getting power or could the bilge pump be effecting the live well pump. If the live wells lack of power is a separate issue where should I check first. Is there an inline fuse for the live well pump? Any suggestions would be appreciated.