Great Catch Charters
Well-known member
- Joined
- Jul 24, 2013
- Messages
- 45
- Reaction score
- 2
Hoping someone smarter than me went through this and figured it out. I have a 2002 2320. Last season the fuel gauge got quirky. I grounded the wire from the gauge to the tank and it went to fill, disconnected it and it went to empty. I'm told that's how you tell if the gauge is good. I then replaced the sending unit with a Moeller reed type that was in there. If the sender is out and I slide the float 1/2 way it reads 1/2 a tank. Same deal for full or empty. Once in the tank, it's quirky. Same thing as the original sender. Goes from full to empty and is all over the place.
Yamaha digital fuel gauge is what I have. I'm really not sure what else can be causing this.
Gauge seems Good and a New sender. I'm ready to just pop in a manual gauge on top of the tank or run a Moeller needle gauge and New wires to the dash. I hate running a full tank.
Any hints would be appreciated.
Thanks
Jim
Yamaha digital fuel gauge is what I have. I'm really not sure what else can be causing this.
Gauge seems Good and a New sender. I'm ready to just pop in a manual gauge on top of the tank or run a Moeller needle gauge and New wires to the dash. I hate running a full tank.
Any hints would be appreciated.
Thanks
Jim