2530 Parker LOA ideas

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Costamesaspearo

Active member
Joined
Sep 27, 2017
Messages
36
Reaction score
8
Location
South Orange County
Hi Guys,

Looking to pick up a 2530 parker this winter but my local marina Dana Point only has 25' spots open. They allow up 28' in overall length for the 25' spots. Curious if there is any possible way to get a 28' length, not sure if I could remove the front pulpit and turn the outboards all the way to port side? Would appreciate any advice, thanks again!
 
Unfortunately the wait list is 6 plus months for dry storage, just trying to explorer any of options instead of downsizing to a 23'. They only do the initial measurement then I could install the pulpit and rails back on.
 
warthog5":2s0qgtyt said:
The hull alone...Minus bracket.....Minus pulpit = 25'-4"

Correct.

Unlike some other boat companies, Parker measures hull length from stem to stern.
Pulpits, brackets and motors are not factored into the overall 'size'.

That is why a 25 Parker is 'larger' than brand X.
 
Back
Top