trim tabs

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sgt2x

Member
Joined
Jan 7, 2017
Messages
5
Reaction score
0
i have a 2004 2510 mod v w the bracket my tabs are not working at all the question i have where do i start to trouble shoot lenco tabs, original with the boat i think . any recomendations on repair or replacement on the size or brand thanks Brian
 
I guess I would start with if they are making any noise at all when you push the buttons at the dash. This is a quick check to see if they are getting any power at the tab actuators. If the switch at the dash and the control box are working and sending the power to the actuators but they are not moving then you will know that you just need to replace the actuators. This is a reasonably easy job. If no power, then check the fuse that supplies power to the control box at the helm. I hope this is what you are asking for?
 
Back
Top