Search results

Hello Captains, I have a question. Has anyone used or have any experience with the Minn Kota i-pilot? I'm on the east coast and was wondering if it would work on my 2520 on the ocean and if so which model would be suitable. I notice that the ad shows a Parker on a calm day. Any information would...

Hi Captains, I hope i'm in the right place.I have a 1996 Yamaha 250 saltwater motoring I have a problem with my telltail clogging up, so my marina suggested that I should have it replaced. So I look at it and decided that I could handle it myself. I then took off the six bolts, took off the two...

Hello Captains, I have a problem. I'm trying to remove the tell-tail because it has clogged up twice last season and the marina suggested that I have it replaced. So I looked it over an saw 6 bolts and two small hoses. I thought not to bad, yeah you guessed it, I didn't have a clue that there...

Hi Captains, it's been awhile since you had to come to my rescue, I searched for the answer but I couldn't find it. How do I take off the wiper arm on a 96 pilot house? Is there any way to change the type of wiper arm that would eliminate the 1.5 inch extension? I lose that little extension so...

Hello captains I have a question, has anyone tried Captain Tolley's Creeping Crack Cure on a deck to fill in spider cracks?

Hey, how is everyone doing? I have a question about cracking on the deck of my 1996 2520 Parker. The deck of the boat has no soft spots but has some hairline cracking on it. I would like to know if there is anything I can do to fix these cracks to prevent any future damage. Thank you

Hello guys/gals I need your advice again, I'm looking to buy a new gps/fish finder combo. I fish for stripers, also fish over wrecks off N.J. coast. I'm looking to pay about $700. Thanks in advance for your time.

Help, while filling the steering helm unit with fluid, the fluid ran out between the unit and the helm. The fill port is on the unit. Any help would be appreciated, thanks in advance.

Hi to all, I have a question. Where can I buy a splash guard for an 1996 2520? Thanks in advance.

Hi to all CP members, I need some advise as this will be the first season that I have to get my 1996 Yamaha 250, carbed motor ready. What are the must things that need to be done and what are the things I need to check out? Thanks in advance.

I hope this is the right forum, but this is the fisrt time that I will have to do the maintenance on my 1996 yamaha, carbed 250 motor. I would like to know what needs to be done to be ready for this season and what I should look at, that are secondary maintenance items. Thanks in advance for...

It figures. I went down to the marina to pull my boat ahead of Irene and it wouldn't start. This has never happen before, I have a 1996 Yamaha 250 carbed engine. I didn't smell any gas and the primer bulb wouldn't get hard, I have a half tank of gas. I was on vacation so the motor hasn't been...

Well guys what else could it be if the hub is not spun? I was told by the prop guy in Bayville that the prop was fine. I had two mechanics just look at it and thought it was spun but they didn't test it. The motor only has 480 hrs. on it. Just a review of what happened, I went out fishing and...

Help! I lost power. I have a 1996 250 Yammie on a 2520. On the way out my power was fine 4000 rpms at 30 mph. Then on the way in I would push the throttle half way before my boat would start moving and at 4000 rpms I running 18 mph. What the heck is going on? Thanks again guys for your wisdom.

Hey guys and gals, I have two questions. I'm redoing the hull on my boat and during the sanding process there are few spots that show throught the gel coat, do I need to do a gel coat finish or something else? Also whats the quantity of InterProtect that is needed for a 2520 MV? Thanks in advance.

Hello everyone, I have a question. I see alot mentioned about 0x66 but nothing about the v76x. What is the difference? I have the 250 v76x salt water series and the year is 1996. Any input would be really appreciated, looking to buy a service manuel. Thanks in advance.

Whats the best way to flush engine after sucking up mud? The motor is 1996 Yamaha 250. Your information would be greatly appreciated.

Hello guys and gals. I'm ready to install trim tabs on a 2520 mod. single outboard, but just can't get my nerve up to start this project. My question, is their anyone in the Pt. Pleasant, N.J. area, that you would recommend for this job?

Where are all the fishermen and women in the area of the Manasquan River? I used to fish out of Waretown and I'm new to this area, so I'm trying to get caught up on the fishing news.

I got the old salt wet and it is time to start fishing. Anyone fishing out of the Manasguan and had any luck?