Search results

Ended up being water in the fuel. I had a bad tank. Replaced the tank, changed all the filters. Runs like a top

What’s your cruise speed and top speed with the Zuke 250?

Curious if there is any real world experience with anyone who repowered a notched transom mount 2320 with the inline 4 200HP yamaha? I have a 2002 with a 200HPDI. The 200 HPDI gets it done for what I do. Just curious if the F200 has similar performance. Same weight but I can’t seem to find the...

Anyone know where I can find a windshield thumbscrew Latch for a 2002 2320? I did a search on the site and nothing came up. Tks

It’s at a Yamaha shop now.

I ran a portable tank and it still wouldn’t run. I don’t get it. The VST is full as is the separator on the engine. Seems to have air somewhere. Ran great before I did this.

Hi all, looking for some insight. I have a 2002 2320 with a 200 HPDI. I’ve owned the boat for 11 seasons. I pulled it out to change the fuel fill line and vent hose. I had the tank pressure checked and put it back in the water. Those are the only 2 lines changed. I had a slight smell of fuel...

my boat is a 2002. I don’t see any access under the gunnel. It’s all closed up. Im Wondering if I pull the passenger seat out of there is an access opening there?

Ok- clearly looks like I unfortunately need to cut an access hole to get to it. I will likely upgrade to a stainless vent. thanks for the reply

Hi all, I have a 2002 2320 with the black plastic perco fuel vent. I was starting to shrink wrap the boat today and it looked like it had come loose. As you can see, it was broken off and was held on just barely. Any suggestions on the easiest way to replace this? I don’t see any access ports...

A guy named Jonas at Flagship Marine did this exact conversion. His business is located in Stratford CT. He’s a good guy and may be able to give you some insight pretty sure he actually just bought the boat from the owner who ended up moving. I know the guy he did it for was very happy. Pretty...

I have a ground block in my battery compartment. Good next place to start. Thanks

Hoping someone smarter than me went through this and figured it out. I have a 2002 2320. Last season the fuel gauge got quirky. I grounded the wire from the gauge to the tank and it went to fill, disconnected it and it went to empty. I'm told that's how you tell if the gauge is good. I then...

Problem with these HPDI engines is they actually have about 6 different filters. Great engine but a $90 fuel filter is a joke. That's just one. The others are around $40 for the spin on that is engine mounted with the gasket and VST tank and they are a real pain in the a$$ to change Your car...

It's fixed. I got some good info from the guys on The Hull Truth. Many experienced the same issue. One guy had the exact issue and suggested the metal filter first. Hopefully this will help all of those having the same issue. I tackled the easiest filter first. The metal filter ($90) on top of...

I'm thinking it's something on here that is too smart like a throttle sensor telling it to back off. Engine just runs too good for it to be anything plugged?

Hi all, I have a 2320 with about 350 hours. It has a 200 HPDI. Has run flawlessly. Today, I was trolling for a couple hours real slow. When I went to take off and jump on plane it ran great but I seemed to have lost the top 400-500 RPM. It's actually weird. If I keep the throttle control at...

If it's the Wise seat I just replaced my block and bushing with wise. Email Karen Clark at Wise. She is fantastic to deal with. I sent her pics of my seat and she figured out the part numbers and sent me the block and bushing for $15 [email protected] is her email. Good luck

My wife clearly didn't handle it as well as me or the boat! One if my few "dislikes" of this boat is the passenger seat. It's the single forward facing bench but there is no handle for the passenger. I'm thinking of putting a good helm type seat there with big bracket type arm rests to give the...

I've had my 2002 2320 for a year now and finally had a good opportunity to run through some moderately rough seas in it for a decent length distance. Went over to Port Jefferson over the weekend in a 3-4' following sea with bigger occasional holes hitting me on the port rear corner. Not real...