Recent content by charlesretired

Look into a product called KiWI GRIP , I have used it and I can say it holds up extremely well in my boat that is used mainly for fishing. It is easy to apply. PM me if you want some tips on application.

gman1001, here is what I did to solve the access problem for wiring in the console , added some storage at the same time. Hope this helps . I have lots of other mods and upgrades. If interested PM me.

Just a little tip , when I did my replacement I made a foam rake . Take a piece of 1/2 metal conduit and flatten 1 end, hacksaw some vee notches to simulate a rake then bend the end 90 degrees about 1 inch from the end. This will help get down along the stringers to get the foam out. Also...

Google " Parker Boat Decals ." Lots to choose from

Sscoville For all your wiring supplys try .....bestboatwire.com I have had very good results Charlesretired

Hello Chetmorris I have a 23' DV 1995 . The space in front of the gas tank on mine is 29 w x 22 h x 52 l at the top inside , remembering the shape that would be in the bottom. I installed a 24 x 13 deck hatch for access , and a flat plywood bottom, great place for storage, or additional...

It can be done with a bat switch , spring loaded 2nd position and 6 connection wire lugs. 2 wires from sender to 2 lugs that are for normally on and going thru switch to the full time gauge . 2 wires from the spring loaded lugs to the added gauge. When switch is in normal position the...

Brent . DIY . Pettit EZ Poxy Topside Hatteras off White . Comes in quarts . No mixing . Brush or roll Flows out great and good color match. I have used in the past and can easily get 2 to 4 years pending use. You can add or sprinkle grit if you need more traction. Paint...

WestCoastNut The link is a photo of the side of the box. Not sure if this will answer your question. If not you can call Navico https://photos.app.goo.gl/M6IZVzv0HUJ8TMD52 Thanks

An all-in-one transducer, Part # 000-12568-001 TotalScan™ matches proven Broadband and CHIRP sonar with StructureScan HD and DownScan Imaging™ technology, making it possible to target fish and search for fish-holding structure with the same transducer. The TotalScan™ transducer features multiple...

Jeff After you layout where the sub framing members are per the drawing from Parker, take a drill with a 3/32 bit and confirm were they are supposed to be by finding the edges by drilling holes at 90 degrees about 3/16 to 1/4 apart until you feel that you are only going thru 1 layer . Mark...

Not to keep beating the drum , disregard the tip in my earlier post the only white wire I used was for a foot switch in the bow which that 16 ga. all other wires to and from are red and black. NOTE ALL the info provided is great and if I had all that prior to my installation I would have...

Thanks Wart You have some good info, but the cheap shot was not necessary !!!!! Don't you work in your backyard ? The instructions from Lewmar call for 10 ga. then they put out an addendum to drop to 8 gauge in the box with the winch. You should direct your expertise to the engineers...