I used this for my Parker 1801. GVWR is 2,999 lbs. I believe it will fit boats between 18-20 ft.
The good: The led lights work, it has a new winch strap and the jack stand was replaced last year.
The bad: Rust is taking over one of the crossmembers and springs.
The trailer is located in Lewes...
Check out UPDplastics.com Yes you will pay a premium and the lead time will be a little longer but they do a great job. You can choose the thickness, tint, and they will cut to your exact specs. They shipped mine with new rubber spacers, and a drill bit used to drill holes without cracking...
A 2020 Tundra pulls my 1801 and before that it was a 2008 Tundra. I certainly didn't get my truck for the gas mileage but I can pull my rig around town, across states, up hills down hills and up the steepest ramp without worry. I will say when vehicles get a "tow rating" applied to it it's not...
https://www.updplastics.com/parker-boat-windshields/
Scroll down to the listing ...
Inside Windshield Dimensions: 29 1/2 L x 13 1/4 W x 19 H
This Windshield Covers the Following Boats: Parker 1990 17ft Sport CC, Parker 1991 18ft Sport CC, Parker 2005 18ft CC
Obviously you should double check...
I just replaced the windshield on my ‘07 1801 for the exact same reason. I used UPD Plastics out of Florida and couldn’t be happier. He includes the windshield, new spacers, and drill bit. Worked out great. If I ever have to replace again that is who I’m using. If you use them I can tell you...
The stereo is a Clarion CMS1. The VHF is Standard Horizon Quest GX1500S with the optional CMP25RAM+ Mic. Keep in mind these electronics are probably 13 years old. If I were to do it again I would mount using the same remote station setup. Here is a pic of the Stereo and VHF mounted under the...
This set-up has worked really well for me. Stereo and VHF are mounted under the console with remote stations on the console. Like most others the FF/GPS units are mounted up top. Good luck with your set-up.
Hey everyone, recently I installed a brand new UPD windshield for my 2007 1801 and I have the old one if anyone is interested. The old windshield has a severe case of Crazing throughout and that's why I replaced it. Not sure if it could be used as a mold for new one or for someone who doesn't...