Recent content by Deadrise36

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Deadrise36

    Pilothouse guys (or anyone) what would you do?

    "On my bay boat, I could just drive in on a 30ish degree angle, turn the motor toward the dock (in reverse) at the right time and be done. The pulpit and long pilings prevented this angle. By the time the back end pulled around, the house had gathered speed heading away from the dock" The key...
  2. Deadrise36

    Pilothouse guys (or anyone) what would you do?

    Hello Bodick93 "I should have pointed the tail into the wind and eased sideways to the end of the dock, stepped off with the lines, and walked the boat around the end, to be perpendicular to the wind and tie up". That sounds like the safest most controlled approach. I spent 22 years in the...
  3. Deadrise36

    Boat For Sale 2020 2520XL

    Sure thing, I'm out of town now will post some up this weekend.
  4. Deadrise36

    Boat For Sale 2020 2520XL

    2020 Parker 2520XL F300 (167 hrs) Free standing 2nd station Deluxe helm seats P/S Seas-pension x2 Garmin 942 XSV with B60 Garmin 110 VHF Ice blue Fresh water wash-down Trim tab indicators LED spreader light x1 OSF4 15 Power Tech Prop Lift kept, no paint or trailer Urbanna Va $132,000
  5. Deadrise36

    2520 XL with new Suzuki 300

    I think you will find it worth the wait. I waited 7 weeks for an OFS4-16 that it did everything I had hoped except for only getting 5500 rpm wot. Sent it back and got the 15 in short order. I haven't put much time on the 15 yet, but both OFS4 props give noticeable stern lift, better bight going...
  6. Deadrise36

    2520 XL with new Suzuki 300

    Max: 1.5 mpg 6000 rpm - 40 mph - 6 bars engine trim Cruise: 2.3 mpg 4200 rpm - 29 mph - 4 bars engine trim
  7. Deadrise36

    2520 XL with new Suzuki 300

    Engine is mounted as low as it can go
  8. Deadrise36

    2520 XL with new Suzuki 300

    Running an F-300 on a 2020 2520 with an OFS4 (four blade) 15 pitch x 15 1/4. I'm getting 40 mph at 6000 rpm, 5 bars of trim, 26 gph, flat water. She hops up on plane in a few second - half tank, two people. What is you max rpm?
  9. Deadrise36

    2520xl Boat Lift

    Baker, Lift bunks are 24" inside edge to inside edge.
  10. Deadrise36

    Prop Nut Size F300 2019

    Thank you Andy. Looking forward to your next video.
  11. Deadrise36

    Prop Nut Size F300 2019

    What size 1 1/16" ? Going to be installing an OSF4 once I get the correct sized socket. Thanks, John
  12. Deadrise36

    2520xl Boat Lift

    Sure thing Baker I will measure the bunk spacing next time I launch, if things work out that will be sometime tomorrow.
  13. Deadrise36

    Retirement Dream 2320

    Congrats! Enjoy retirement and 2320.
  14. Deadrise36

    Cabin Door Screen Ideas

    Thank you for the response tomc585.
Back
Top