I think with the Possibility that there maybe a second set of connections at the stern of the boat, I have decided to turn this repair over to the professionals. At 78, I am just not flexible enough to take on this task.
Laying on my back, bending and twisting no longer comes easy so I am going...
I think I found where the connections are. I believe the are folded in a wire bundle under the engine control adjacent to the helm seat. I think if I lift the seat off the pedestal access might be easier.
Thanks everyone for your help, I will keep you posted on my progress
Things just got worse. I decided to just bite the bullet and replace the switch. Tried to order a new switch. They are out of production. You have to buy a new redesigned switch which encompasses the old switch and the trim tab control box. 😡
I finally had time for trouble shooting my system, and I am sorry to say I had little success.
i have a 21 Sport Cabin and my 1st action was to climb in under the steering console. Now I have had the boat, which I bought new, for 9 years. Fortunately I have not had to do much if anything under...
Thank you for your input. I have done some trouble shooting and found the trim tabs are actually moving up and down correctly. The control panel indicates there is no movement and only the lower lights on the right hand flicker
Spoke withLenco and they tell me , it is corrosion some where in...
After 9 years on my 2120 Sport Cabin my trim tabs and not working. No movement at all. Luckily they are in the up position.
Going to start troubleshooting tomorrow. Anyone have advice or pointers?
i have a 2120 and recently installed a new Garmin fish finder. As discussed in this series of posts, my fish finder would not display anything when running above 15 knots. I moved the transducer up and down with no change in the display results. Perplexed I finally put the transducer so low on...
Great Boat you will love it. I have had mine for 7 years and would buy it again. My boat is in north eastern Florida and gets used 12 months a year. Because of heavy winds I waxed it this weekend. Although it has some scratches and dings from those occasional operator errors it still shines like...
I purchased a 2120 SC in 2013. The boat has a Yamaha 150 on it and after 7 years and 1100 hours I am completely satisfied with the boats performance. At the time I purchased it I reviewed the Parker performance data sheet, see attached, and I am happy to report the boat performs exactly as...
I’m with Chuck. I have a 2013 2120 SC and am not aware of any front bilge pump. Is there one I am not aware of or did Parker stop putting a front bilge pump in?
Will not remove until I see the picture. Thanks
Which brings up another question
I did remove 1 screw on the deck flange of the shield and much to my surprise there was no sealant in the hole. The stainless screw screw showed some corrosion all the way down thru the threads to the tip of the...