Recent content by knotflying

Thanks! Now hopefully someone has the cockpit light model and number.

Hi, 2020 2520xlsc I am doing my end of season maintenance and I noticed that the small round light above the step in the cockpit going up to the gunwale is cracked and I want to replace it. Anyone know where to get it or model number and manufacturer. Also the magnetic catch for the tuna door at...

Welcome. I am in Rhode Island, but close to the Ct border. I usually fish anywhere from Narragansett to Block Island and CT waters.

I have a 2021 Yamah 300 HP 2021 with about 125 hours. The manual says to change the impeller at 300 hours. I am looking for input from others to see if doing it sooner is advisable.

As a friend of mine once said, "The more components you put in a boat the more issues you will eventually have." I bought my Parker with the bare minimum to go fishing and not fixing things. The sea keeper may make it better for the roll. but I doubt the "Parker slam" is made better. At that...

There can be a number of reasons for your issue. I am only familiar with Garmin. They had an issue with their units a while back. It had to do with the pump and the symptoms sound like yours. There was a fix, and it required replacing a couple of the connections. In some instances it required a...

I have a Simrad and a Yamaha on another boat. My setup required a plug from the Yamaha buss to a gateway and from the gateway to the NMEA backbone. Every manufacturer wants to make money along the way. Quite frankly after all was said and done I rely on the Yamaha module more than the info on...

is there a link to the site to place an order?

Did they tell you about how much damage will most likely happen from the rewelding? Short of having the entire t-top redone, maybe taping it off on either side of the weld and then a matching epoxy paint brushed on.

Someone needs to tell me how to put in an auto guidance route. On the Garmin I just press on the screen where I want to go, hit auto guidance and bam I have the route. I am new to the Simrad and here is what I have to do: Waypoints>New Route>Use Chart>Touch Chart near boat> Find destination on...

I have cruised over 9,500 nautical miles. All I can say it can be a split second difference between being okay and running into something. Of course speed makes a difference. When at the helm and something is coming at you the natural instinct is to turn immediately, not taking your eyes away...

Yes, unless it is installed properly it can be an issue. The location and mounting are critical to proper operation.

A bit off topic, but if I were buying a chartplotter I would go with Garmin. I have a Garmin in one boat and a Simrad in another. I hate the Simrad. The Garmin is so much more user friendly. As an example: On the Garmin when you want to do auto routing you can just touch your destination. and...

Whatever model you choose stay with Garmin. My experience is that once you go with different brands and components and an issue arises you start to get finger pointing between manufacturers. I also suggest that along with AP you install the shadow drive. The shadow drive allows you to just turn...

I always like to see fuel remaining and on the Garmin once connected to the yamaha you can get an info box showing that info. This way I get the chartplotter, sonar and engine info I want all on one screen.