Search results

My 2 cents to save you explaining it multiple times over the coming years: the lines are confusing. If you want to have it resemble the boat, then place the name inside of an entire outline of the boat. Doing that might make it redundant.

https://stingysailor.com/2021/11/06/remove-and-prevent-mildew-for-pennies/ I used Formula #2. The fur looked great. I applied with a large hand held sprayer. After it was dry, I noted minute dust flying where ever I patted it. It was probably the dead mold and dry ingredients. So I made up a...

http://www.c-brats.com/viewtopic.php?t=20560

Any 12v fuel pump from the auto parts store. They run 30-50 gph so not fast, but they are cheaper than a bulk pump since this appears to be a one-time use.

And was the result of the conversations that surely pursue as to differences in GPH/mpg, cruising and top speeds?

I use the same thing. Still, I'd prefer a round barseat to make swinging out to check rods or wind in easier.

I use the same thing. Still, I'd prefer a round barseat to make swinging out to check rods or wind in easier.

https://www.caranddriver.com/shopping-advice/g28229171/american-flag-etiquette-cars-motorcycles/

Air Force

https://www.mynavyhr.navy.mil/Portals/55/Messages/NAVADMIN/NAV2016/NAV16174.txt ^The NAVADMIN that specifies reverse flag and DTOM flag for wear.

https://airandspace.si.edu/stories/editorial/heres-why-us-flag-sometimes-appears-backwards

After changing them, spray Fluid Film or CRC on them. They'll never corrode again. Mine come off with ease and don't have antiseize on them.

What became of Dale? I remember when he put his Parker up for sale.

Keep it! I went with a Good winch. It's robust and has a stellar reputation. I didn't want a big drum sitting on the front of the boat. Now I wish I had gone drum as the Good still coils the line and the loops close into small knots which can bind in the Good if I'm not drifting fast or anchor...

The man who I bought my camper from said to mix a cup of borax with a bit of Dawn and would fill the holding tank 1/3 fall and let it slosh on the drive to where they would camp for the weekend. That concoction is a well know DIY. I forget it's name. It keeps the sensors clean and keeps a poop...

Have not seen that. Jake Hiles caught a nice one but inside the bay so it was catch and release. I don't have a pipeline to every angler but I haven't heard much from those I do know who have been out. They've reported not much of anything going on, even the whales are 12+ miles out.

I have an old boat so I epoxied a block of wood onto the transom. Old holes were sloppy so dried out with heat gun on low for 2, 3 days, used a 90* awl to remove the punk, then filled with either marinetex or thickened WS epoxy. Once it was well set, I epoxied a block of wood on. The material...

That's not how you spell Yamaha.

https://www.amazon.com/Stern-Light-Anchor-Removable-Inches/dp/B09NVQX9JK I'm curious if the newer style of screw are of the same thread and would work? Pictured is a push in to seal, but may work. I have seen lights where the same base and were threaded, but that was a few years ago. Pole...

I wonder how white Flex Seal would compare? I recently learned a friend with a SeaRay who keeps it wet slipped uses FS on his outdrives. No growth. He said it works better than bottom paint. Color me surprised.