Search results

I'm a long way from my NC home here in Vancouver, BC. I did see a twin to my 2120 here today.

I've had this 2004 2120 w/ Yamaha 200 HPDI since Sept 2019. The engine has been trouble free until this spring. It will start and idle and run at very low RPMs but won't run at higher RPMs. I have changed the water separator/fuel filter (actually changed the whole thing to a stainless steel...

I started adding a bulkhead station to my 2004 2120 last year and got too busy at work to finish it. Trying to do that now. I used a Uflex helm. The helm in the cabin is a Seastar. I'm trying to rig the steering. The Uflex uses 3/8" hard nylon tubing. The original Sea star tubing is...

I just upgraded from a 942xs. The 943 odometer reading resets after every shutdown. The odometer reading accumulated on the 942 and I could reset just the trip odometer. Any idea what setting I'm missing here?

I'm slowing getting my bulkhead station installed. The bulkhead box with steering and shifter is attached. I have an ICOM 506 VHF in the cabin and ran a cable and the smart handheld microphone to the back of the pilothouse. I didn't want it mounted close to the steering wheel and getting...

So, I've had this 2004 2120 for almost a year and a half and I'm getting around to some projects. I'm adding a bulkhead steering station, but it's been raining every weekend so it's slow going. I'm ready to mount it the back of the pilot house and get some measurements for cables and hoses...

I want to re locate the splash guard at the back of the cockpit. The little scupper holes at each end just aren't big enough to let much water out. I was thinking of making spacers and raising it about 3\4". Or maybe making slide in brackets on each end so it's easily removable cleaning, etc...

I just got this 2120 last fall. Work has been busy, but I'm slowly working on projects. The steering has been really sloppy, but coming from a flat bottom skiff I thought maybe that was the nature of a V hull. Friday, I bled the steering system. What a difference! It's a completely different...

My 2004 2120 has a Yamaha 290 HPDI 2 stroke. I have a Garmin 942 Charlotte\fish finder. I've been thinking about adding a Garmin fuel flow meter, but was wondering if there was any way to get the engine and the Garmin to communicate to use the data the Yamaha is already collecting?

I replaced the old helm seat in my 2120 with an aftermarket seat with a flip up booster similar to the ones Parker is using in their new boats. I'm a big guy and could use more space between the seat and the wheel. How is the pedestal mounted from the factory? Is it just screwed down or through...

Visited some friends this afternoon with my 2120. Water is really shallow at their place and when we left the motor would not rev up past 1300 rpm. The boat is sitting on their lift now while I try to figure out the problem. Is it possible I jammed mud into the prop and blocked the exhaust?

I have rough estimates from 2 dealers for adding an Outside steering station. Both are expensive and involve Morse controls. I think I am going to tackle the project myself. I have read some of the previous posts about this. I will be going back through them and taking notes. Any advice would be...

I've been keeping an eye out for a pilot house and found one over the weekend. 2004 2120 with Yamaha 200 HPDI. Any fishing I do will be all by my lonesome so first order of business will be an outside steering station. It needs a good scrubbing and I'm ready to go. I'm coming from a 20' skiff...