Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Help with attaching canvas to gunnel

    TIA for help! Hi guys my 23 center has a three sided enclosure that drops from the T-Top to the gunnel. The bottom is currently secured with twist locks to grommets. Every year I wind up replacing a few after they get stepped. They are also not fun to hit with hands and feet let alone sit on...
  2. R

    trailer for 2300 DVCC

    What's up Parker fam...? I'm looking into a new trailer to take my rig from NJ to Florida next winter. I for the life of me can't find any detailed info on how much my 1999 2300 DVCC weighs. I thought I remember seeing it a long time ago in a yamaha performance bulletin something like 3400...
  3. R

    2300 DVCC repowered with Suzuki 300 need prop advice

    7 people and loaded cooler it hit 6150
  4. R

    2300 DVCC repowered with Suzuki 300 need prop advice

    Thanks Brent - all the above are good advice and I have done all of it. Motor sits up a couple holes and I can spin the 18.5P to 6300 just wondering if I can spin the 20p and get 6000.
  5. R

    2300 DVCC repowered with Suzuki 300 need prop advice

    I am currently running the Suzuki 3X16X18.5 light I can spin it to 6300. Anyone try a 20P? Looking for some real world thoughts before buying a new prop - Thanks!!
  6. R

    1999 23 DVCC Parker replaced hull in 2007.

    Recent repower knocked off the pulpit and high bow rails in preparation for a minn Kota 87 inch electric motor.
  7. R

    2300 DVCC repowered with Suzuki 300 what prop?

    300 zuke mounted with two holes showing (top) swinging 16x18.5 Suzuki 3 blade. Holds plane down to 3300 rpms. Full of fuel 155 gal and a few people on board she turns 5800 light she’s 6100 rpm motor is a huge step up from 2004 yamaha 225 and there is almost no weight difference. I’ve seen 43...
  8. R

    2300 DVCC repowered with Suzuki 300 what prop?

    The boat has not been wet yet. I have been in touch with another CP member with the same set up and he has his motor mounted higher, running the same prop so I think I might call and get the marina to left it before I launch. Always appreciate helpful comments - thank you
  9. R

    2300 DVCC repowered with Suzuki 300 what prop?

    Ok 23 dvcc people what prop? Suzuki 16x18.5 or something else? Also marina mounted in 2nd hole, is that high enough? Thanks!
  10. R

    23 DV CC outboard suggestion

    Hey thanks for the replies. Curious are you referring to the older Yamaha 250 or the newer larger block model. My gut tells me I would prefer the extra cubes to swing a bigger blade but I'm looking for real world experience. Thanks :D
  11. R

    23 DV CC outboard suggestion

    Hi guys I bought a used 23 DV CC a couple of years ago and I really like the set up. I do want a little more power when I decide to replace the 2004 f225 which has 1100 hours. Nothing wrong with the currant motor and she sips fuel. I am running a 3 blade Yamaha stainless 17 inch pitch that...
  12. R

    Transom Bracket Repair

    I just checked it. Stainless marine out of miami.
  13. R

    Transom Bracket Repair

    Hello all.... First time Parker owner here, fourth boat. I recently purchased a used 23 DVCC. The previous owner had a kicker motor installed and the bracket was not originally molded to accept a kicker. The kicker was installed using a stainless bracket. I removed the mounting plate and...
  14. R

    Rod Holders

    Tom, I received the rod holders. Thank you. Jacksdad I'm going to hang on to all 4.
  15. R

    Rod Holders

    Tom, I replied to your PM. Thank you, Ralph
  16. R

    Rod Holders

    I'll take them if you pay the shipping to egg harbor township nj 08234
  17. R

    Info needed from 2510 owners

    Thank you for taking the time to reply. I was looking at the 2510 in delaware as well. Seems like a reasonable deal until you start looking at taxes, cost of a trailer, electronics etc you're a in around 70k for a 5 year old boat. I'm still skeptical
  18. R

    Info needed from 2510 owners

    Looking at a 2510XLD with twin 150 4s - is it enough power? What type of cruise and fuel burn should expect? Read lots about changing tabs to the larger ones - has anyone done this on this boat? Boat currently has high bow rail - can I replace with regular bow rail using the same holes...
  19. R

    WTB: 23SE 2004 or newer

    My brother in law has a 21DVCC and sold me on the durability and low maintenance. Don't think I need the DV as I will primarily be fishing back bays and nearshore but wanted the extra space of the 23. email me at [email protected]
Back
Top