Search results

Repowered my 2008 2320 this past winter with a new 4.2L F250. Old motor was the 3.3, I ran a 4 blade OSI Turbo 15P prop plus a SE Sport foil. I run a very heavy boat with crew and gear, dealer put a Yamaha SWS 13P 3 blade on the new motor. I found it to have terrible slip on the hole shot...

Which permatrim would you add to a new F250?

Had my MK 87" installed today, considering cutting my bow rail and adding a hinge and some caps. Anyone know the diameter of the rail on a 2008 2320?

Starting this thread to hopefully help some others, will update as my installation happens, but for now here is what I have purchased. Saved some coin with Black Friday deals. - Minn Kota 87" $3,100 - (3) Ionic 12V 100ah Lithium Batteries $1991 - NOCO Gen Pro 10x4 Charger $264 - Minn Kota Plug...

So many large bass this fall I'm bored of them and switched over to togging. Never seen so many 20-50lb fish in our area, put over a 100 fish in the boat past couple weeks with mostly overs going back and a couple slots kept.

Starboard wiper motor started acting a bit strange. When I switch it on, it's starts out very weak and then eventually almost normal, almost like it needs lubrication. Any ideas on how to fix or do I need to replace? If replace, best source?

All set for another season. 2008 2320 w/ F250.

Thanks to those who provided some info and pictures in the past. My unit finally arrived from ordering it this past March, now it's time to install it. Have a BattleWagon mount and my question is, how do you get the power and network cables through the grommet? I would drill an access hole...

Bit the bullet and purchased a 18xhd dome, battle wagon 6" fore leaning 4 degree mount, and a cable clam. Going to do the install myself, have seen the notes regarding epoxy for the holes and a few other pictures but here is my question. I plan to mount on the raised portion of the 2320 roof...

Starting to think about replacing the F250 on my 2320 with a new motor, would be staying with Yamaha for various reasons. Been seeing a lot of older 2320's being repowered with F300's of various brands. Can someone tell me if this is affecting getting insurance if the boat is rated for a 250hp...

No affiliation..... https://www.thehulltruth.com/boats-sale ... -sale.html

Looking to upgrade the stock helm seat but don’t want to break the bank. Any suggestions and anyone ever try a Springfield ladder back seat? Happy Thanksgiving to all.

2008 2320 - Anyone know the size and type of fuse for the main circuit in the bilge which would control the float switch?

So had a strange issue that has finally been resolved, ethanol was definitely the culprit. If I pushed the motor over 5k rpm she would begin to hesitate like it was starved for fuel. Tried new anti-siphon, water separator, primer ball...still no good. Inside the rigging tube from the stern to...

On my new to me 2008 I currently have the original prop and the motor in the original position all the way down. Looking to possible move the motor up and try a different 3 or 4 blade prop. If you have a 2320/F250 on a bracket please post your motor height and prop. Thanks!!

For those of you who have a 2320 curious what hole your engine is mounted in, believe Parker mounts them all the way down at the factory and it looks like mine is mounted down in the last hole. What year, motor, height are you guys running?

Anyone ever add flush mount rod holders in the transom of their 2320 in the spaces between the port and starboard transom hatches where they meet the center hatches? Looks like there is enough room between and I am aware they would stick into the storage area in the back.

New to me 2008 2320 with an F250. Notice some vibration between 3500 - 4600 rpm. Bring it over 4700 and vibration pretty much is gone. I don't feel the vibration on my body much but can see it on the helm mounted electronics. Motor has stock prop and is down in the lowest hole from the factory...

Don't always have the use for a live well, only really need to keep bunker alive when bass fishing and fish alive when I do some commercial rod and reeling. Decided I did not want to cur holes in the deck or plumb anything below, also wanted something I can put central on the deck to act as a...

New to me 2320 already has a Garmin 545s installed but I am adding a 741xs with a GT-21 thru hull transducer. Because of the size of these new transducers marina wants to install it mid ship rather than aft. Reasoning is in order to place in the stern the battery tray would need to be cut in...