Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. F

    Which holes to remount 250HP on my 2008 Walk around 2510 XL - modified v

    Was wondering if anyone has any experience in raising your engine on either the 2510 or 2520. After repowering with a Honda 250 last Spring my mechanic is now suggesting that we try raising the motor a notch (or even two) to try to gain better fuel efficiency. (I get between 1.7 and 2.0 mpg...
  2. F

    HAVE A 2510/LOOKING FOR ADVICE FOR PROP ON NEW HONDA BF250

    Just repowered my 2008 2510 with a Honda 250 hp. Am looking for any advice on which prop to use. Tried a couple different ones and so far a 4 blade 17 pitch gets me at 2.1 mpg with one person and half tank fuel. I'm looking for fuel efficiency not speed. Had a Yamaha 250 original and so far...
  3. F

    2520 XL with new Suzuki 300

    Ok. I question only because when I was bottom painting I noticed a stamped "max HP of 250" on bottom of the bracket. Maybe a 300 would have no effect on that??
  4. F

    putrid odor in my 2510 holding tank area

    To johnfbushjr, My holding tank is located between the helm chairs, in the deck hatch (on a 2510), Hope that helps you.
  5. F

    2520 XL with new Suzuki 300

    I was thinking about repowering my 2510XL (2008) with a 300hp. Would I have to change the armstrong bracket too?? Thnx.
  6. F

    putrid odor in my 2510 holding tank area

    Its located in the deck hatch between the seats
  7. F

    putrid odor in my 2510 holding tank area

    Ok. Thnx guys. I'm going to try to pump it out a few times, but I haven't used it in 2 seasons. Tried everything in it....from pine sol to mixed bleach/water. I'm thinking the odor may be coming from the foam around the tank. And, just found out this week, that the "compartment" that holds...
  8. F

    putrid odor in my 2510 holding tank area

    I have owned a this 2008 walk around for 5 years now and cannot figure out where this odor is coming from. Its only when I open the deck hatch to the holding tank. No odor comes from the other deck hatches, the one in the stern for the battery compartment or the one in the cabin. Its not...
  9. F

    help in finding windshield wiper motor fuse

    Thnx. Found fuse panel next to holding tank pump out. Parker did good labeling them, never saw before because labeling was faded
  10. F

    help in finding windshield wiper motor fuse

    I was installing a new wiper motor starboard side on my 2510. Forgot to switch battery off when hooking up wiring; had a spark and then a "pop" after 2 wires touched accidentally and now no juice now to the wiring or rocker switch. Does anyone know where that fuse might be? Many thanks!!
  11. F

    foul odor around holding tank on my 2510

    Was wondering if anyone knows of a cure to the stinky odor which emanates from around the holding tank on my 2510. Its definitely not from inside the tank; and I changed all hoses. It seems to be coming from the foam cushioning the 12 gallon holding tank in place. I'd love to remove the...
  12. F

    which rides better? 2320 or 2510 mv??

    I have a 16 degree 2510 and have been thinking of buying a 2320 thinking that the 2320, with its deeper vee, will pound a lot less and ride better. The 2510 I love except when it gets snotty out and the pounding in short seas kills my back. I fish in Long Island Sound and off eastern Long...
  13. F

    Parker 2320 (225 vs 250 vs 300)

    Davey D - I think I'm gonna sell her and look for a deep vee with a 300. Bracket is approx 4G I'm told; so is it worth it on an XL? Her pounding bothers me in certain seas, so I'm thinking if I'm going to reinvest in a new rig, get a deep vee with the bigger motor.
  14. F

    Parker 2320 (225 vs 250 vs 300)

    I want to repower my 2008 2510 with a 300hp; it now has a 250hp Yamaha. But the Armstrong bracket has "250hp max" stamped on it. Do you think it prohibits me from going up to a 300hp? Am wondering if you fellas faced this issue........thnx. Joe
  15. F

    Is it safe to lag screw in a tall seat pedestal?

    Thank you guys! As soon as it gets a little warmer I have my project. And its anti-virus! JOE
  16. F

    Is it safe to lag screw in a tall seat pedestal?

    Looking for some advice; I have a 2510 WA, 2008. I removed both the helm seat and storage box it was screwed into to enable me to troll easier. I'd like to install a basic 30" pedestal (as the helm seat) in place of the storage box. Is it ok to use toggle bolts through the deck? Or is...
  17. F

    Prop size question 2510xl with single 250 Yamaha??

    Thank you Albiejunkie. A prop guy who was highly recommended to me has me trying the Enertia 15 x 15 which has made considerable improvement for me; but not to the numbers you are getting. I have to find a Rev 4 and 17 pitch to try. Thnx again.
Back
Top