Adding New GPS Map at second station

[Realtor]

Here's what I ended up going with. Can see it behind me fighting a shark. Works great and I remove it when not in use.

 

[Aheider]

Looks great!

 

[Miker1234]

The mount is definitely a RAM mount. The spacing between the adjustment knobs is right at 6 inches. The base and two 6" arms. Super solid and well built. Hope that helps.

View attachment 39338

Do you have a link to this on the site?

 

[Aheider]

https://www.hodgesmarine.com/ramram-109v-1u-ram-mount-vertical-double-6-swing-arms-w625.html

I think this is the same one. Hope it helps.

 

[SharkBait]

Question for you Aheider did you put any kind of backing plate on the inside of console or did you see no need for it

 

[Aheider]

Do you have a link to this on the

Question for you Aheider did you put any kind of backing plate on the inside of console or did you see no need for it

1/2 inch piece of starboard.

 

[Miker1234]

Question for you Aheider did you put any kind of backing plate on the inside of console or did you see no need for it

1/2 inch piece of starboard.

This is a great solution. I’m excited to add one in the near future.

 

[The Swede]

Here’s my rear setup on 2330

 

[Bodick93]

I found a great deal on this big boy (Evo3 not "s") that wouldn't fit in the cabin as hoped. Mounted it with the riser earlier in the thread to clear the throttle. Doesn't impact vision from cabin that I notice. Second pic shows throttle clearance. You can't grab it on top and hammer it, but I never do that anyway (in the cockpit).

 

[Realtor]

I found a great deal on this big boy (Evo3 not "s") that wouldn't fit in the cabin as hoped. Mounted it with the riser earlier in the thread to clear the throttle. Doesn't impact vision from cabin that I notice. Second pic shows throttle clearance. You can't grab it on top and hammer it, but I never do that anyway (in the cockpit).

Dang, one could watch movies on that screen! Very nice!!

 

[CityIsland2320]

Found the perfect fit. 7" Garmin