dave-j
Well-known member
My new (to me) 23 is a 2000 model that had been used in NC and had an old Lowrance GPS/Sonar. Short story is that nobody makes the chips anymore for my area and I had to replace.
Ofcourse, neither the old antenna nor the transducer fittings work with the new unit (Lowrance 26C HD), so I have to re-rig. No problem with the antenna. Did that last Sunday.
However, the transducer cable runs from the transom, under the deck and comes up into the center of the console. Looks like a tight fit. Is there anything I would be wary of before starting my "fishing" expedition to change out the cable this weekend?
Ofcourse, neither the old antenna nor the transducer fittings work with the new unit (Lowrance 26C HD), so I have to re-rig. No problem with the antenna. Did that last Sunday.
However, the transducer cable runs from the transom, under the deck and comes up into the center of the console. Looks like a tight fit. Is there anything I would be wary of before starting my "fishing" expedition to change out the cable this weekend?