• If you have bought, sold or gained information from our Classifieds, please donate to Classic Parker Forum and give back.

    You can become a Supporting Member or just click here to donate.

Full Set of Diamond Sea Glaze Windows for sale too large for my Sowester.

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Papdaddy

Member
Joined
May 7, 2019
Messages
16
Reaction score
3
Location
Annapolis, MD
I have a complete set of windows for a newer Parker Pilothouse (either a 2520xl or a 2820). I have a 1989 Parker 25 Sowester and was hopeful that the front windows would work since they flip out and my current windows do not. However, these are way too big. I'd like to sell them as a set. Asking $245098199377_3284713851586149_7907031510580985856_o.jpg98000598_3284713818252819_1102533326247297024_o.jpg98093600_3284713781586156_7984907294951342080_o.jpg98021893_3284713691586165_2025165298692259840_o.jpg97995533_3284713624919505_708574057997533184_o.jpg98111971_3284713591586175_6214375819666522112_o.jpg97999631_3284713471586187_1179878493178036224_o.jpg99010831_3284713411586193_1302664362560847872_o.jpg for the entire set.

Windows are located in Maryland.
 
I am interested in your windows. Could you give me the measurements of the frames that protrude into the openings.
im in south jersey. If they are the right size I will come and get them. specifically interested in the front tilt out windows. Thanks
 
I would be interested in your side windows if you would separate them.
 
I sent you a message on Facebook. I'm interested. I need to measure mine (2520XL) just to be sure they are the same if your's came from a 2820....I'm fairly certain the pilothouse is the same mold on both hulls, but not 100%.

Where in MD are you?
 
Any luck selling these? Would you consider selling just the handles and latches?

Thanks!
 
I would be interested in the front windows. We would need to figure out shipping because I am in California.
 
I’m not sure what they will fit. They were not in the boat when I bought them. I was told they came off of a Parker but I know that they don’t fit my 2520 sowester. Please refer to the photos in the post which include measurements to determine if these will fit your boat.

I don’t mind putting on a pallet with padding etc. But you will have to arrange for and pay for shipping. There are some good sites that allow you to post your shipping needs and the shippers bid on it. Lots of trucks go back and forth from Maryland to California empty or half full everyday that would gladly take a pallet with them. But again I can’t have any responsibility for that.
 
I’m not sure what they will fit. They were not in the boat when I bought them. I was told they came off of a Parker but I know that they don’t fit my 2520 sowester. Please refer to the photos in the post which include measurements to determine if these will fit your boat.

I don’t mind putting on a pallet with padding etc. But you will have to arrange for and pay for shipping. There are some good sites that allow you to post your shipping needs and the shippers bid on it. Lots of trucks go back and forth from Maryland to California empty or half full everyday that would gladly take a pallet with them. But again I can’t have any responsibility for that.
I have a complete set of windows for a newer Parker Pilothouse (either a 2520xl or a 2820). I have a 1989 Parker 25 Sowester and was hopeful that the front windows would work since they flip out and my current windows do not. However, these are way too big. I'd like to sell them as a set. Asking $ View attachment 25396View attachment 25397View attachment 25398View attachment 25399View attachment 25400View attachment 25401View attachment 25402 for the entire set.

Windows are located in Maryland.
 
If you’ll sell the 2 front windows, how much would you take. I can PayPal you today and have my son pick them up this week. My son lives in Pasadena, Md.
thanks,
frank s.
301-758-1540 (lv message I’ll call you back immediately)
 
Before I do a lot of homework on lining up shipping, can you please answer two questions.
1. What condition are the windows in. I am doing a major rebuild on my 2820 and the alluminum around the inside of my windows is heavily pitted. I would only be replacing mine for cosmetic reasons. I am only interested if your windows are in very nice condition.
2. Are ALL the parts for the windows still in place? In one of the photos, it looks like one of the locking arms on the front window was missing.
 
These windows are still available.

97995533_3284713624919505_708574057997533184_o.jpg97995533_3284713624919505_708574057997533184_o.jpg97999631_3284713471586187_1179878493178036224_o.jpg98021893_3284713691586165_2025165298692259840_o.jpg98111971_3284713591586175_6214375819666522112_o.jpgFront Window Dimensions.jpeg
 

Attachments

  • 98000598_3284713818252819_1102533326247297024_o.jpg
    98000598_3284713818252819_1102533326247297024_o.jpg
    240.8 KB · Views: 3
  • 98093600_3284713781586156_7984907294951342080_o.jpg
    98093600_3284713781586156_7984907294951342080_o.jpg
    269.2 KB · Views: 3
  • 98199377_3284713851586149_7907031510580985856_o.jpg
    98199377_3284713851586149_7907031510580985856_o.jpg
    246.6 KB · Views: 3
  • Side Window Dimensions.jpg
    Side Window Dimensions.jpg
    251.1 KB · Views: 3
Back
Top