Looking for Comments on Rod Holder Placement

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

esfishdoc

Well-known member
Joined
Mar 22, 2006
Messages
564
Reaction score
0
Location
Franktown, Virginia 23354
And Installation.

Now that I have my Lee Jr. Wishbone outrigger holder and the 19 foot (gold tip) Lee poles..... I need to add rod holders.

How should they be positioned?

I've been told they should be pointing at the place the clip will be holding the line. How important is this?

Any suggestions or routine on the process of cutting rod holder holes.....

As always... Thanks,

Richard
 
Richard, my outriggers are mounted on the hard top and are double rigged Lee 16' XS poles. We run the outside from a Lee rod holder attached to the port and starboard side mounted handles and the inside from the forward holder in each side gunnel. The 4 rear rod holders are run to clips in the aft rub rail . One last rod is run WWB from the top center. total is 9 rods I wish the pic was clearer. This works for me , may not for you. I am sure others will have some ideas as well.
Keith
 

Attachments

  • Outlaw.jpg
    Outlaw.jpg
    53.3 KB · Views: 613
Back
Top