Looking for options to cover over an old dash install

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

rloomis

Well-known member
Joined
Feb 12, 2008
Messages
84
Reaction score
4
I'm replacing my old Furuno radar with a Simrad Halo 20+. Since I will no longer need the Furuno MFD, I'm replacing it with a Simrad NSX 7" that will fit flush in the dash in its place. Problem is, the Furuno's going to leave a bigger hole than the NSX 7 is going to fill. First thought is mount a sheet of starboard to the dash to cover the old hole but wanted to post and see if any of you have ideas for other options to make the new install look good. Thanks in advance!

20210410_045500.jpg
 

warthog5

Well-known member
Joined
Feb 23, 2006
Messages
3,805
Reaction score
365
Location
Pensacola, Fl.
I use 1/8in 5052 alum..... In the end it gets epoxy Primed , Base coat Silver and High Impact Clear.
 

Attachments

  • Robby Dash.jpg
    Robby Dash.jpg
    611.6 KB · Views: 19

Bodick93

Well-known member
Joined
Aug 16, 2019
Messages
212
Reaction score
44
I like it...but I like polished tubing too (vs powder coat), so I may be an outlier.
 
Top