Nylon vs Polypropylene rope???

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

longranger

Active member
Joined
Aug 21, 2006
Messages
31
Reaction score
0
Location
California
I need to replace my mooring lines. My boat is dry stored so the lines get relatively light use. How do nylon and polypro stack up against eachother for ease of use, durability etc??

MB
 
Polypro floats and has no stretch...good for attaching a type IV throwable cushion or ski tow line.
Nylon stretches, resists chafing, doesn’t shrink when wet .......good for dock lines, anchoring or mooring. Nylon's ability to stretch makes it dangerous under strain. If the attached hardware comes loose the line may turn it into a projectile.
 
Anchor rodes and dock lines should be nylon. 3-strand has more stretch to it than braid, and if you leave the boat in the water during storms, 3-strand is recommended because it absorbs some of the slamming forces on the lines and hardware.

No line is chaf proof. Make sure you use chaffing protection of some kind if you slip the boat.
 
longranger":3v4dmef9 said:
I need to replace my mooring lines.

3-strand nylon.

Image-5C4ED7FC4F5411DB.jpg


Image-5C51DEFC4F5411DB.jpg
 
Back
Top