Propeller question please help!

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

blutgendorf

Active member
Joined
Jul 12, 2020
Messages
33
Reaction score
2
I wanted to reach out for opinions on what prop I should be running on my boat to reach all around maximum performance. I have an 04 Parker 2320 powered with a F225. I’m currently running a 15x17p prop and run 5300 rpm WOT. Pretty sure I should be in the range of 5800-6000. Your feedback is very appreciated. Thank you
 

Brent

Well-known member
Supporting Member
Joined
Mar 19, 2008
Messages
5,770
Reaction score
78
Location
Greenwood, Indiana & Charlotte Harbor, Florida
Set the motor height first. Anti vent plate should be skimming water surface when on plane, full gas , crew and gear. Retest it and note max rpm . Reprop if needed. Check with Ken and Prop Gods. You search this site , too
 
Last edited:

blutgendorf

Active member
Joined
Jul 12, 2020
Messages
33
Reaction score
2
Set the motor height first. Anti vent plate should be skimming water surface when on plane, full gas , crew and gear. Retest it and note max rpm . Reprop if needed. Check with Ken and Prop Gods. You search this site , too
Hi Brent, really appreciate your input. What holes do you have your motor set on the bracket?
 

knotflying

Well-known member
Joined
Jun 11, 2020
Messages
95
Reaction score
41
If after you make your engine height changes and you want more RPM's I would suggest you call Yamaha direct. They are helpful with advice.
 
Top