UDP Plastics Windscreen - which thickness?

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

gman1001

Well-known member
Joined
Jun 25, 2021
Messages
59
Reaction score
3
All,
Any reco's on thickness for a new windscreen from UDP? They sell either either 1/4" or 3/8" with the later being easily $100 more than the 1/4" I'm thinking the 1/4" should be sufficient.

Thanks!
 

pelagic2530

Well-known member
Supporting Member
Joined
Nov 17, 2006
Messages
1,484
Reaction score
236
Location
Indian River, DE / Norfolk, VA
All,
Any reco's on thickness for a new windscreen from UDP? They sell either either 1/4" or 3/8" with the later being easily $100 more than the 1/4" I'm thinking the 1/4" should be sufficient.

Thanks!
I went with 1/4”. That’s what comes stock from the factory, as long as nobody is grabbing onto it or it has any load on it you’ll be fine.

You may want to see if there’s a plastic fabricator close to you before you order from UPD or any of the other online sites. Usually cheaper and quicker turnaround.
 

gman1001

Well-known member
Joined
Jun 25, 2021
Messages
59
Reaction score
3
Solid a
I went with 1/4”. That’s what comes stock from the factory, as long as nobody is grabbing onto it or it has any load on it you’ll be fine.

You may want to see if there’s a plastic fabricator close to you before you order from UPD or any of the other online sites. Usually cheaper and quicker turnaround.
Solid advice! I was/am a bit fearful of what shipping would be on a windscreen!
 
Top