Water in fuel

[Easternshoreboy]

Good morning
Tried to search archive’s couldn’t find any answers. I have a 2120 with water i fuel . What has you all do e to remove fuel from tank . Or best practices to get water and and boat running right . I planned on completely draining tank on trailer ahould I tilt trailer foward and backwards trying to get more out ? After drain replace fuel separator and put 50 gal fuel and stabilizer in .
Thanks for any help

 

[captmatt]

First, you need to find out where the water got into the fuel tank and fix the problem. In an older boat, fuel hoses and the sender gasket degrade and can lead to leaks. The o-ring on the fuel filler cap is a very common place for water to get in.

To pump out the tank, you need to fashion a safe fuel pump and filter rig or hire a fuel polisher. Open the tank by removing the sending unit and then use a copper pipe attached to the fuel pump hose to get into the corners.

If you open the sender I would replace the gasket.

Age of the boat will determine how far you need to go. An older boat is likely to have at least some gunk in the tank.

 

[Easternshoreboy]

First, you need to find out where the water got into the fuel tank and fix the problem. In an older boat, fuel hoses and the sender gasket degrade and can lead to leaks. The o-ring on the fuel filler cap is a very common place for water to get in.

To pump out the tank, you need to fashion a safe fuel pump and filter rig or hire a fuel polisher. Open the tank by removing the sending unit and then use a copper pipe attached to the fuel pump hose to get into the corners.

If you open the sender I would replace the gasket.

Age of the boat will determine how far you need to go. An older boat is likely to have at least some gunk in the tank.

Thank you boat was setting inside before never notice a problem . Will check fuel filler oring and sender . Boat
Is a 2005

 

[tomc585]

TIme for new fuel fill, vent and supply lines if they are OEM

 

[Parker 2310]

First, you need to find out where the water got into the fuel tank and fix the problem. In an older boat, fuel hoses and the sender gasket degrade and can lead to leaks. The o-ring on the fuel filler cap is a very common place for water to get in.

To pump out the tank, you need to fashion a safe fuel pump and filter rig or hire a fuel polisher. Open the tank by removing the sending unit and then use a copper pipe attached to the fuel pump hose to get into the corners.

If you open the sender I would replace the gasket.

Age of the boat will determine how far you need to go. An older boat is likely to have at least some gunk in the tank.

First, you need to find out where the water got into the fuel tank and fix the problem. In an older boat, fuel hoses and the sender gasket degrade and can lead to leaks. The o-ring on the fuel filler cap is a very common place for water to get in.

To pump out the tank, you need to fashion a safe fuel pump and filter rig or hire a fuel polisher. Open the tank by removing the sending unit and then use a copper pipe attached to the fuel pump hose to get into the corners.

If you open the sender I would replace the gasket.

Age of the boat will determine how far you need to go. An older boat is likely to have at least some gunk in the tank.

CaptMatt

As a result of Covid and multiple immediate family deaths my 2310 has been under wraps for a long time. I am finally able to get back to it, but the fuel in my tank (150 gallons) is three years old. How do I get to the sending unit to open it up? Is it one of the access holes in my deck? I plan to empty the tank because the engine is new and don’t want to even try that old gas. The bot is on a trailer and the gas tank is fine but I need to replace the fuel. I am open to any thoughts. Thanks

Walt