Recent content by Pat

I have a 2310 and stand most of the time too due to the ride being a little bumpier further forward on the boat. Was thinking about a leaning post to take some weight off the legs/knees on a long day. Can you post a pic of your leaning post?

Just recently replaced mine on a 2310 and I bought a 10' hose and cut off about 2' when finished.

I got the Lumitec Caprera2's from BOE and they are nice. They are white and red. Turn them on they are white. Off, then on again and they are red and plenty bright to get gear ready.

Still interested in 2310 Eisenglass enclosure if anyone is looking to sell. Also interested in rear cushion insert for v-berth. Thanks, Pat

I pinged Robyn/Eric a 3rd time. They have usually been very prompt, I must have pissed them off. :oops:

Hi All, I want to change all the plastic thru hulls on the '00 2310 I bought recently. I've asked Robin/Eric 2x for hose dimensions but havent gotten a response. Since it seems popular on here to do this task, I was hoping somebody knew off the top of their head. Here's what I have: 1) 2...

Apologize for resurrecting this thread but I'm back trying to finalize my decision now that the Furuno 587 finally came out. Since the flat is the best place on the DV hull for transducer location, has anyone put a larger one there like the B260 or SS270W with high speed fairing block? These...

What make/model LED's for under the gunnel? What does the multi-color switch look like? Yours look great and I'm ready to do the same.

If anyone has a spare laying around and wants to sell, I'd be interested.

Eric, I went from an 1801 to a 2100 to a 2310 in 3 years. :lol: The 2100 is 3x the boat the 1801 is and the 2310 is 3x what the 2100 is if that makes any sense. :? Bottom line, the 2100 will get you offshore on good days, the 2310 will get you out there alot more days and keep you, your...

year 2000, and I'm mostly interested in the front piece only. Perhaps it may be close enough to work out a deal.

If anyone has the 2310's 3-sided enclosure from the factory and wants to sell, let me know. Thanks, Pat

Wajski, Picture from bilge side would be a great reference. I just want to confirm it's in the center on flat part of hull, how far forward from transom and model # of the ducer. Thanks, Pat

Wajski, Which ducer did you install? Any chance u could attach a pic of the location, as I would like to match that performance? Thanks everyone for the responses. 8)

Just sold my 2100 and bought a used 2310. Very excited. Can someone with full transom 2310 confirm you have good enough access to put in 1kw tilted element ducer with 3.75" diameter ducer? has anyone tried putting the 0 degree tilted element in the center of the hull where the deadrise is flat?