I originally thought of doing the same thing but the way the transom hatch is situated is so the underside of the hinges is not accessible. There is a small gap, maybe a 1/4" between the inside of the livewell and the underside of where the hardware comes through. I think I will try to do the...
I have a 2520XL with the live well across the transom. The outside hatches are just screwed in with four small wood screws and there is nothing to prevent the hatch from opening too far and pulling the screw's out. Well just that happened this summer so I tried fixing it the other day. I drilled...
I am wanting to install a kicker motor onto my boat and wanted to see if anybody has installed one on the stock bracket. On my last boat I had an aluminum kind of box cut at a diagonal (if that makes sense) that the kicker mounted to. I was thinking of having a similar box made and bolting that...
I think a lot of members on here are from the east coast and I'm not sure if you guys use downriggers much with the type of fishing you do but I wanted to see if anybody has any pictures of where they mounted their downriggers. I have the flush mount cleats and not much room behind them between...
Hello, I have been looking through this forum for a while but I have never posted before. I am located in Seattle and there are not really any places to get parts for my boat. There is a supposed parts dealer here but I contacted him and he said he will get his parts guy in contact with me. He...