Search results

:lol: Last Phase Completed! New Windshield!

Thanks for all the advice. Warthog, I do have the right setup as you described. I was told by a Yamaha mechanic that the primer bulb will not get hard on the new 4 stroke fuel injected motors. He was correct. I took the boat out this weekend and had no issues. As long as you prime the fuel...

The arrow is pointed correctly. After priming the Fuel Filter/Water Sep. with fuel, the motor did start fine. I am concerned that the fuel may not flow properly. Am I being paranoid? Nick

Ready to Go!

Here is the final product! Ready to Fish..... :D

I am having issues with priming gas from my new tank to the Yamaha Fuel Filter. I cannot prime any gas into the bulk after trying many times. I just installed a new tank and lines recently. (See other posts on project page) I then proceeded to fill the Yamaha Fuel Filter with gas and screwed it...

It absolutely fits through the garage door. Made sure of that during the restoration of the console. If needed, I could have moved the mounting holes down far enough in case i needed to. I tested it out and it fit fine. Plenty of clearance!

Console installed complete with all hatches from Boat Outfitters.com. Original colored starboard "Fish White".

Base of Console is finished! Waiting for new console doors and seat from Boatoutfitters.com. Getting these made in the original "Fish Whte" Parker colored starboard! Should look sweet! Stayed tuned for the final pics!

Console work is just about complete! Lots of cleaning, laying up fiberglass on the inside of this console to fill screw holes and unwanted switch holes and openings. Filling with epoxy fairing compound and sanding, lots of sanding. Then priming and painting with Total Boat Topside PU Paint in...

Thanks Warthog5, Are those stainless lag screws into the deck? I presume you drilled into the deck and coated screws with 5200? Thanks,

Thanks Cameron, I did find one a little closer to me in Delaware. They don't come for sale too often. Here is my console that I am restoring. This is basically the last phase of my boat restoration! Can't wait until Spring! I will continue to post pictures as the rest of the updates take...

I have a question for any Parker 1801, 1800 owners. How is the console attached to the deck? I have purchased a used Parker Sport Console and want to attach to the deck. The console is two pieces and I would like to know how the base of the console is fastened to the deck. Thanks,

Now I am looking for a Console for this boat. Does anyone have any suggestions?

All work done by: :lol: Sprouts Fiberglass Repair Bay Boat Works Hances Point Rd. Northeast, MD

All Finished! New Gelcoat floor and interior, complete with new non skid!

Here is the deck after fareing!

Guys, No foam around tank, I did not want moisture to get between tank and foam to cause corrosion. It is a 30 Gallon tank. The installer said that the tank is solid and will not move. Hopefully he is correct!

There are 4 welded tabs on the tank and they are bolted into the stringers. Starboard spacers between the tank and stringers. The tank is suspended between the stringers and above the floor. The cables extend to the bilge area and all is loose with nylon lines to feed cables if necessary in the...

Coming Along Nicely!