Question for Parker 1801 Owners - Console attachment to deck

[Silversides]

I have a question for any Parker 1801, 1800 owners.
How is the console attached to the deck?
I have purchased a used Parker Sport Console and want to attach to the deck.
The console is two pieces and I would like to know how the base of the console is fastened to the deck.

Thanks,

 

[camron]

I am pretty sure it is screwed down I could send you a pic of mile when I get into town.

 

[1801Steve]

Two pieces. Bottom screwed down, then top piece fastens to bottom piece.

 

[warthog5]

He want's to know "Exactly" how the bottom half is fastened to the deck?

There are several good was to do it.

Post pix's of the console to deck flange

This is how I mounted my seat box's on my Mako. It's 1 1/2in alum angle... Cut, fitted, drilled ,sanded , primed and painted with Awlgrip.
fasteners thru alum have a stainless roof style washer .... It has a rubber seal to isolate the stainless from the alum.

It's thru bolted in the sides. This was VERY strong.

 

[Silversides]

Thanks Warthog5,
Are those stainless lag screws into the deck?
I presume you drilled into the deck and coated screws with 5200?

Thanks,

 

[warthog5]

They are stainless.... What you can't see is the extra work.

I install a very small piece of heat shrink where the fastner would contact the alum This keeps the dissimilar metals from touching. I also install a nylon flat washer under the stainless flat washer.