Boat Lift Specs

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sbieleck

Well-known member
Joined
Jun 22, 2008
Messages
59
Reaction score
0
Location
North Palm Beach, Florida
Will an 11,000 lb. lift hold a 2520xl? Does anybody know how far apart the rails should be on the lift? Any comments would be appreciated.
Scott
 
If there's any correlation between lift and trailer capacity I would say 11k is fine. I have 9.5k trailer and people have said its overkill for my 2520. (I like overkill :wink: )

As far as bunk width goes I'll measure the space on my trailer in the morning maybe that will get you off on the right foot.
 
Thanks Ryan. I didn't think of doing that. I have the boat on a trailer now. I can measure mine, but I would still like to know what your distance is.
 
I installed a lift for a friend of mine last year and did a post with pictures. Do a search for my posts and you will find it.
We measured the trailer bunks as well. Worked great.
Good luck.
 
sbieleck":ubofjsrs said:
Does anybody know how far apart the rails should be on the lift? Any comments would be appreciated.
Scott

I recently sold my 1801 which was kept on a Davit Master lift.

Since then, I've purchased a 2120 and needed to find out the same information.

I emailed Eric at Parker and he responded quickly with the information needed.

[email protected]

Kevin (M5)
 
Back
Top