U ultrasport Well-known member Joined Aug 6, 2009 Messages 167 Reaction score 5 Location Mt Sinai, Long Island Dec 26, 2015 #1 Guys what length motor shafts are used on 2120? 25inch?
C camron Well-known member Joined Nov 23, 2011 Messages 651 Reaction score 23 Location Long Island NY Dec 26, 2015 #2 Should be 25. But a tape measure will tell you exactly
U ultrasport Well-known member Joined Aug 6, 2009 Messages 167 Reaction score 5 Location Mt Sinai, Long Island Dec 29, 2015 #3 Still not sure measured from the joint of the lower unit approx 1inch above cavitation plate. Attachments image.jpg 22.3 KB · Views: 112
warthog5 Well-known member Joined Feb 23, 2006 Messages 4,350 Reaction score 617 Location Pensacola, Fl. Dec 29, 2015 #4 Whats the numbers on the existing motor..... The model number? It's usually included in that. L for long =20in x for extra long - 25in and XX = 30in. Shaft Length Guide Short: 15" Long: 20" X-Long: 25" XX-Long: 30
Whats the numbers on the existing motor..... The model number? It's usually included in that. L for long =20in x for extra long - 25in and XX = 30in. Shaft Length Guide Short: 15" Long: 20" X-Long: 25" XX-Long: 30
U ultrasport Well-known member Joined Aug 6, 2009 Messages 167 Reaction score 5 Location Mt Sinai, Long Island Dec 29, 2015 #5 Ah thank you. 25 inch it is Attachments image.jpg 31.7 KB · Views: 105