New tower installed 23SE

[jkm412]

Still need to do the rigging but thought it turned out nice

 

[Mark T]

Nice. Cobia season is coming.

 

[warthog5]

On your rigging....You can get rigging tubes that are White to blend in......But You can get Black that are 2 1/2in....That extra 1/2in makes a BIG difference when working on the boat.

The standard is 2in.

Now put all the crap that needs to go in there plus some and it's a PITA.

What is Plus some?

A 6 gang fuse panel up there and 2 -10ga wires to feed it. This is for power port and electronics power up there. There will be remote radio control hyd steering hoses.... 3 of them. depending on your motor? Fly by wire wires or control cables.

There is always more than you think.....Go bigger on the rigging tube.



Here you can buy it by the ft.

https://www.fisheriessupply.com/th-mari ... s-and-kits

 

[jkm412]

I have fly by wire on the motor but I think I am going to have a Yamaha dealer do the rigging, I would save 8 hours of labor but I think it's a little out of my league

I probably should rephrase my original post "still need to have someone do the rigging"

 

[warthog5]

I still suggest the 2 1/2in rigging hose.

Who ever you have do it...Talk to them about it...They and You will be glad you did.

Easier to rig and more room to flex when you lay it down.