Recent content by CraigS

I have a Flo n’go 14-Gallon fuel transfer tank. What a PITA, it takes three hands to use it. One to operate the nozzle, one to support the hose to keep it from kinking at the nozzle and one to keep the hose from kinking at the tank. If everyone holds the hose just right, you can achieve close...

I got a 2003 Pathfinder 1806V with a F115 Yamaha. The boat was in northern Michigan it's entire life used, very little and never in saltwater. Not much of a market for Pathfinders in that area, so I think I got a great deal. Craig

Wow that is one great looking boat! As I said in the other post it is sold so I can not take pictures of the bases. These are not the ones I had but I think these will work. http://promotionfishingproducts.com/ind ... uct_id=118. Craig

After three years of ownership I sold my 2000 Parker (21SE) today to the first person to look at it. I bought the boat for my son and I to go near-shore fishing, last year he moved 1500 miles away, so the time had come to sell it. It was a great boat for us, it is easy to understand why Parker...

Sold the boat today, so I can't take any pictures for you. There is a plate installed on the box, and the seats slide into the plate from the side. There is a lever that locks them in-place. Sorry that is the best I can do to describe them.

SOLD! 2000 Parker 21 SE, 101 pound 36V trolling motor 2000 Yamaha 175 HP Two-Stroke 2012 RoadKing Aluminum Trailer Selling because I have downsized to an 18 foot Pathfinder. I bought this boat to fish with my son, who has moved to Texas. The Parker is too big for just me, and the ramps...

Questions about putting a trolling motor on a 21 SE seems to come up every year or so, so I started this thread to post pictures on the installation I have. The installation was professionally done, by the previous owner. The TR is a 36V 101 LB Minn Kota.

The prop has come out of the water, but it is rare. To my knowledge, and I will double check this weekend, there is a "stop" on the TM shaft to prevent the TM from going down to deep. From what I remember my TM is set so that the prop is in the water and could be 6 inches deeper by adjusting...

Not sure of the shaft length, the boat and the paperwork are in the Beaufort area. (Anyone that is in the Beaufort/South RIver area is welcome to stop by on the weekends to look at the setup) I will measure the trolling motor's shaft and take a few pictures to post them over the weekend or on...

I have a 2000 21 SE with a 36V 101 LB thrust Minn-Kota trolling motor. My Parker does not have any bow rails. If you are interested, I will take a few pictures this weekend. Craig

I am looking to up-grade the trailer for my 21SE. The local trailer guy is recommending MagicTilt trailers. The other brand of trailers he sells is LoadRite. He is also recommending springs over torsional axles. My cost for MT trailer with Kodiak disc brakes is $4100. I want to work with...

Xmako, I have a 2000 21SE (bought it 2 years ago) and I hope you enjoy your boat as much as I enjoy my Parker. Like you, I find the ride on the SE much better then I expected. Mine has a carb’ed 175 Yamaha, and it is a little thirsty. Craig

I think I have about 60 gallons of gas in my tank, the boat is a 2000 21SE. Some of the fuel is E-10 and I do not want it in my tank over the winter. What is the easiest way to get the gas out of the tank? Due to health issues, I will not have the opportunity to use the boat and burn the...

Still available? If so, please check your PM. Craig

I like searchtempest.com Craig