Latest activity

Did a quick sand and re-gel of the bilge. New bilge and livewell pump in place. Just need to wire and plumb. Went with the Rule 800...

SEAsaw is getting bottom painted this week then slash down. Found a good one of CrabbCake too.

I have a 2300. I used the fuel vent line. I taped an old piece of garden hose to the hull side of the vent line. I then taped my 6ga...

I have a 2300. I used the fuel vent line. I taped an old piece of garden hose to the hull side of the vent line. I then taped my 6ga...

I've done that in the past.... Anytime you make a hole smaller....Less water can come in....:)

I’ve seen similar designs on fresh water fishing boats. I think those are commercially available. They work well and don’t mark the...

Because You do NOT have a dedicated House battery. What ever position the Perko is in......That battery is powering Engine and House...

I've done that in the past.... Anytime you make a hole smaller....Less water can come in....:)

Where are you located. I am having a new boat built and will be selling my 2520 at some time this year. It is not currently listed. Call...

Yours is different...my path was for an 1800. But I see your challenge. What's under the pie plate? I started in the console.

My hope and plan is to handle the touch ups myself the same way. Hopefully for the next many springs. Letting the yard guys do the heavy...

Yesterday wasn't my first trip to the Gulf Stream. It was; however, it was the first trip with my wife. And ONLY my wife. Let me...

This path for the wire pull?

My hope and plan is to handle the touch ups myself the same way. Hopefully for the next many springs. Letting the yard guys do the heavy...

I took Pelagic's earlier advise and removed the side access door, which made it much easier to get my torso inside the console.