Thanks Dale for the information. I did look at the post (again) and it was some good information. I was just wondering if everything would be the same for a 90hp. I have changed the water pump on my ox66 225hp with the same post. As for parts from Andy have you found his prices to be the best? I...
Hello Everyone,
I'm hoping someone can point me to the right direction on a download file, with pictures of course, on how to change the water pump and a few other things. I still have my 2520, however I picked up an 03 Polar 1800 bay boat with a Yamaha 90tlrc. I got the boat at a real good...
I'm looking to sell my 2520 sports cabin. The boat is in nice condition and has a 225 Salt Water Series II outboard that I just serviced. The motor has 446 hours on her and has never given me any problems. The boat has an open transom with stock rocket launchers with an older 10' Garmin GPS that...
Tim,
Thanks for the information, you and the rest of the guys have been very helpful with keeping my motor running strong over the years. I owe everything I know to Classic Parker members and saved tons of money doing the maintenance myself. I'm on basically the same schedule as you with the...
Engine runs fine when it warms up however when I first start it up it I have the problem. It will usually stalls at least once then it will run fine. If I have the engine turned off for an hour or so same thing all over, Any ideas?
I changed the plugs, both the fuel line and engine gas filters...
snagged a Bunker and let it drop outside the Barnegat inlet. Don't mind the "knees" cutting off the bottom of the fish as it is just my friend Jonathan trying to share my excitement in the prone position in between chumming over the side of the boat.
Thats what mine was doing a few weeks ago but would not let me go over 2000 rpms. I had a very clogged VST with white gunk. There was no warning, One day ran fine, the next had the problem. Cleaned the VST filter with carb cleaner and off I went with no other issues...
I was bogging down whenever I tried to go over 2000 rpms. When I hit any chop it would go far below 2000 rpms then catch and go back to around 2000 rpms. The problem started suddenly with no advance warning. Friday it ran fine, Monday it was boggig down. I had the vst changed out in March of 08...