Sure just let me know if you have any questions and I'll try to help. I really worked on getting it right and the trolling motor has worked better than expected in so many ways. I've had it mounted for 5 years now with no issues.
Good question. I use the bow locker as a fish storage box. Putting the batteries in there would have been much easier and help with weight distribution. I am not sure how thick the fiberglass is in that compartment and two large batteries might be an issue if they are not secured well. The older...
I just made an aluminum plate and mounted the TM to it. I ran 4 or 6 gauge wire down the starboard side to the box in the stern. From there I ran it up to the CC. I have 2 twelve volt DC batteries in there. I have 2 bank charger that charges the TM batteries when underway and a 3 bank charger...
Hi,
I have an 1801 and we primarily fly fish on the west coast. I put a 24v Minn Kota RipTide ST w/ iPilot 60" 80lb thrust on the bow. This is powered by two group 29 deep cycle batteries under the front console seat. I ran the wires down the starboard gunnel to the stern and then back up to...
This is from my 3 year old Parker factory bow rail in excellent condition. I removed it to install a trolling motor and I'm now selling it. You would have to pick it up as I have no way to transport. I'm located north of Los Angeles near Thousand Oaks. Asking $600 Thanks
MIke S,
I have an 1801 that I'm going to outfit with fly rod holders. Could you post a pic of what you did with the bow with regards to the tips of the rods? Trying to wrap my head around getting past the gas fill. Thanks.