Search results

Hello All, I recently replaced my fuel sending unit due to a crack and leak around the seal. However, some fuel and water was able to leak off the top of the tank and down the backside into the foam and sealed fuel tank compartment. Today we shot some video through the rear deck plate while...

Hello All, It's almost time for a service and I may want to tweak the motor a little more - but first I want know.... - Has anyone raised the motor all the way ?? What can I expect ?? Most of you have seen my mods: http://www.classicparker.com/phpBB3/viewtopic.php?f=19&t=15993 2007 2310 DV...

The Caulk Seams on the Deck of my 07- 2310 have gotten ratty after many seasons of fishing/washing. Its time to remove, clean, and replace what appears to be silicone caulk use from the factory. I am able to dig out most of it with a scraper - but was wondering what to use for the last bits of...

I completed this install a couple of weeks ago and want to update others about the outcome. -I believe it is important to other Parker Owners to have accurate information to reference, and this site and its members have been good to me - so here goes. My boat is a 2007 2310 DV with F250 Yamaha...

Here is the situation: I had a local Boat Yard install a B164/ 20deg. on my 2310 Parker DV. Its connected to a Furuno 587. The unit completely looses the bottom when traveling above 12 mph. I could only attribute this to air bubbles/disturbed water passing over the transducer face. There is a...

I have a 2007 2310 with the in deck fish box. The screw holes on the deck side of the hinge have stripped out. There is no access to through bolt the hinge with a backing plate. Is there a secure way to re- bed the screws in the deck, or a proven method of fixing this hinge? Thanks Bill