Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Replace Batteries?

    Thanks Warthog! Stupid question, how do you load test them? Also I run with both batteries on; why would it spike my GPS?
  2. S

    Replace Batteries?

    I purchased a 23SE new back in 2016. I haven't had any issues but one (discussed below) however curious to see when people switch out the batteries considering I am passing the 4yr mark. I would rather be proactive than being stuck with dead batteries but is 4 years too early? I haven't seen...
  3. S

    23 SE with 200F XB

    That seems low - I can turn about 5800 (5900 once) with a WOT of 42MPH (GPS confirmed). F200 4S.
  4. S

    What size Yeti for 23SE?

    I use a 65 quart, it's a RTIC but same size as a Yeti. I had the same thought of putting it between the aft jumpseats but noticed it "got in the way" with my motor trimmed up and the hoses not having enough room to move. I simply put it behind the live well, did not attached it; the weight of...
  5. S

    Casting Platform on 23 SE drain overboard?

    So I was able to inspect behind the port side bow speaker and view the locker/drain. So the hose that connects to the port side drain was indeed loose and I was able to attach. I didn't have a ring clamp but the hose did snuggly fit the drain hardware; will do this later. Now the question is...
  6. S

    Casting Platform on 23 SE drain overboard?

    Seonill: I believe you are correct; looks as if there is a dedicated portside drain outlet. I contacted Parker directly but never got a call back from them (On a side note, I attempted to call them a number of times about various questions however never once have received a call back). I...
  7. S

    Casting Platform on 23 SE drain overboard?

    I have a 2016 23SE hull and wonder the same thing. I noticed that the front bow locker does not drain well. I took a water hose and blasted water through the drain in the locker thinking it was clogged and the pressure of the shooting water may unclog. After a a minute, the back/stern port...
  8. S

    23SE and Power Pole???

    Happy Dawg, REALLY appreciate the reply! I am flip flopping between the PP Blade or the 12' Talon. How high is the pole above the motor? Did you use engine bracket or fix it directly to the transom? The other 25%, assume you are offshore or nearshore. Does it get in the way of trolling?
  9. S

    23SE and Power Pole???

    Thanks for the reply! Any issues of getting in the way? Do you do any near shore trolling?
  10. S

    23SE and Power Pole???

    Is a 23SE too big/heavy for a power pole? Flirting with the idea of getting one, motor mounted bracket on mine but unsure if it's too large and heavy for a power pole. Thoughts and/or experience? TIA!!!
  11. S

    Trolling Motor OR "Power Pole" anchor?

    I saw a video clip where someone used their power pole as a "Jimmy Rigged" downrigger where they attached a clip on the extension pole when deployed, ultimately making the line go down 8-10' lower then just trolling off the boat. With that in mind, curious to hear of some pole just deploy their...
  12. S

    Confessions of a Green Horn... Help!

    Brent: I am referring to crossing other boats in the ICW so there is not really a "speed limit" other than good old common sense. Even though I am a Greenhorn, I know that some folks don't always use common sense and go way too fast. Nothing I can do other than reacting safely to their ways.
  13. S

    Confessions of a Green Horn... Help!

    Kidfeediver, thanks for the input... My 23SE does not have any after-market modifications and running pretty much what came from the factory; don't have any additional weight in the "ass" as you mentioned. Are you referring to me using the trim tabs more to lift the stern thus making the...
  14. S

    Confessions of a Green Horn... Help!

    RWP48, ha! I am glad to hear that I am not the only one... Yes, my wife told me the same thing - which I am working on but not dialed in quite yet. You and others have mentioned playing with the trim tabs. I normally do not run tabs unless there is an uneven load on one side of the boat...
  15. S

    Confessions of a Green Horn... Help!

    Paul, thanks for the reply! I have slowed down even to a complete stop to avoid the pounding effect. I have tried a bunch of different speeds to test it out; no speed expect a dead stop will avoid the slap and pound. I have tested slowing down and when coming off the first wake, I have...
  16. S

    Confessions of a Green Horn... Help!

    Burtona, thanks for the reply. Like I mentioned, I have slowed down quite a bit. The only way I can NOT make it pound is when I come to almost a complete stop/neutral throttle so I just roll over the waves. Here's the typical situation: a) cruising about 25knots in the water way b) see an...
  17. S

    Confessions of a Green Horn... Help!

    Shawnee83, thanks for the reply. I am referring to the pounding effect when I am crossing a wake from a boat coming towards me; the wake thrown from a passing boat either on the port/starboard side. It pounds when I hit the second and third wave motion from the crossing boat. I have tried...
  18. S

    Confessions of a Green Horn... Help!

    Hate that my name and profile will be associated with this post but NEED HELP!!! First a quick disclosure... I picked up my first boat (ever) which was a 23'SE back in Nov 2015. Had some time to get comfortable with it and learning my way inside/outside of the boat. I am having issues of...
  19. S

    Trolling Motor OR "Power Pole" anchor?

    I have a 23SE and thinking of getting either a trolling motor or a "Power Pole"; fishing backwaters and hate anchoring with a traditional bow anchor (aka can't anchor with a crap). Likes and Dislikes: Trolling motor seems to be more versatile with new technology like "i-Pilot" spotting GPS to...
  20. S

    New Parker/wood construction.

    Recently purchased a 2016 and there is a life time warranty that came with mine regarding wood rot. I am hoping you saw this on yours too. On a side note, when people mention sealing the pie covers, wouldn't it be best to let them breath rather than sealing them 100% shut?
Back
Top