Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. FishHeadGreg

    Wood inside bow pulpit

    Can you share a photo of your bow/issue? Maybe you can add a metal support under or on top? Maybe the u channel idea works, maybe it doesn't. just a heads up due to time I didn't sent out to powder coat. I wipe it with T-9 boeshield often. It's part of my maintenance schedule. Every time I...
  2. FishHeadGreg

    Wood inside bow pulpit

    close up side view when done with pulpit project, before I did the TM and bow nav lights PS the larger anchor hatch door is highly advised if you ever need to do work in/up there. I still have to put on bow cleats back on. I'm surprised I've made it a whole year almost without them
  3. FishHeadGreg

    Wood inside bow pulpit

    Hope these photo help. The last one is from a week or two ago showing my bow. You can see how I mounted by TM using u-channel which is super super strong and was $100. I have friends with plates that flex and I didn't want to get into that. I know many who use different custom plate with great...
  4. FishHeadGreg

    Wood inside bow pulpit

    I have a 2006 2520 with a 96". My boat had the pulpit held one with... 4 large lags from the inside going up but not through. 2 through bolted into rail stations 8 through bolted for cleats Once all were out the pulpit was still mounted like a rock. Either epoxied or 5200/similar adhesive. I...
  5. FishHeadGreg

    Wood inside bow pulpit

    Removing the pulpit will not be easy. I had to remove mine. It will turn into a large fiberglass job. I would mount the TM with an offset mount off the bow quarter (behind navigation lights) in a location where the motor lays parallel with the boat laying up along the side inside of the bow...
  6. FishHeadGreg

    Wood inside bow pulpit

    not going to be easy to get a new one from the factory. maybe I'm wrong but I tried to get a new one through my local dealer and was told no go. I buckled mine and It turned into a PITA project. I've got my Tm mounted with an offset plate and couldn't be happier.
  7. FishHeadGreg

    2520 autopilot compass location

    I chose starboard side v-berth compartment too
  8. FishHeadGreg

    2120 Trolling Motor 36V Lithium

    I'm not sure what you are asking me to explain. Right now my Ionic onboard charger (It's a two bank 36/12) does my 36v Ionic TM battery as well as one 12v (house) battery when at the dock hooked up to shore power. The Powerpole Charge will replace this very soon (waiting on it's arrival) to...
  9. FishHeadGreg

    2120 Trolling Motor 36V Lithium

    No shore power in a hard one with a TM. IMO you will need to take the battery home and charge it. I've got a 2520 with a Rhodan 120#/96", Ionic 36 with the onboard Ionic two bank 36/12. Depending on the day's conditions I can get anywhere from four to eight hours of use. I expect a Powerpole...
  10. FishHeadGreg

    New windlass recommendation

    I went with a Good Windless. It's a great fast free fall operation style windless. They have been around for a very long time and make a great product. Personally I think their name should be Best Automatic Windless because they are the best one I've every had and dealt with. Plus they are local...
Back
Top