Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Captsteve123

    Took delivery of my 2022 2120SC... the good, the bad & the ugly

    How long do they plan to have your boat to make the repairs?
  2. Captsteve123

    Problem filling gas tank: Parker 1801

    I have heard that some people are removing the black can filter that is before the exterior vent and the problem is resolved. I think it is a charcoal type filter canister under the gunnel cause the back flow issue.
  3. Captsteve123

    Problem filling gas tank: Parker 1801

    My 2022 25SE has to be filled slowly as if I pump fast, the back pressure shuts the pump off. I have not seen fuel come out the vent and I also have never seen this black spill canister under the gunnel that could have something to do with allowing it to fill.
  4. Captsteve123

    Pulling a 25se with 1500 truck

    Ramps are the hardest with a trucks including 4x4 trucks when the ramps are damp, low tide, and or end of day. I had issues getting out of the ramp with an F250 4x4 on certain occasions. As far as pulling on highway, tandem axle and trailer brakes make it easy enough, with the exception you are...
  5. Captsteve123

    Don't have a Parker yet, but looking

    Just recently purchased a 2022 25 SE, with 300 Yamaha., T-Top and rigged it with a Minn Kota 112# trolling motor 86” shaft. Absolutely love the bait and the size. Wife loves it even more!
  6. Captsteve123

    LED TRIM TAB LIGHTS AND TAKING ON WATER…

    I have a brand new 25SE and alway see water in the bilge which is something I am not happy about. I know that washing boat and rain since mine is on a lift, does get water in the anchor hatch and other hatches including the one in the floor. Those hatches do not keep anything dry. I have done...
  7. Captsteve123

    Underwater lights

    I know you want new lights, but why not have Parker fix your lights under warranty as you paid for them to work when you purchase the new boat. I have a new 25 SE with lights and they work amazing.
  8. Captsteve123

    Bow Navigation Lights

    Very nice! I like that better than all the work to cut the SS rail! Thanks for the idea.
  9. Captsteve123

    Bow Navigation Lights

    Has anyone converted the Bow Navigation lights to the LED run rail lights? I am thinking I need to do that because that light is in the way of my new trolling motor install.
  10. Captsteve123

    Rhodan TM Issue

    Did you get the problem fixed? I recently had my Rhodan TM have the same issue after having it almost a year. The FOB quit working, so I changed the battery in it, and it started communicating for about 1 hour. I was on the flats, it quit again fortunately during a week day, I immediately...
  11. Captsteve123

    trolling motor on 25 se cc

    I just purchased my Minn Kota and have to install it soon. Old boat had Rhodan and it was nice for the first year, and board went bad. Under warranty and they fix it, but that was too soon for a board failure for me. Prior to that, my motor guide last since 2003 and it was new.
  12. Captsteve123

    New to Parker Family

    Thank you! Wife made me upgrade! Lol
  13. Captsteve123

    Rhodan 84” on 2003 Parker 2510

    One caution about that brand trolling motor. Make sure you either keep the head covered and out of the rain, and or put a small 1/2” strip is flex seal around the joint for the top and bottom cap of the head unit. Mine was filled with water from rain, and it is less than a year old. They are...
  14. Captsteve123

    Permatrim - looking for feedback

    Admiral/C&B Propeller is one of the largest propeller shops in the USA and the only full service propeller shop and marine machine shop in Tampa Bay. Worth giving them a call and they can help you out!
  15. Captsteve123

    Permatrim - looking for feedback

    Switching from a Pathfinder to the new 2500 SE, my 4 blade on my Pathfinder work perfectly at slow speeds and top end was 55 mph. Preference would be to prop the boat for the performance you want, and not drill into a LU.
  16. Captsteve123

    trolling motor on 25 se cc

    Did you need a longer shaft than the 87” or did you mean that is the right length. I am looking at the 72” shaft for the 2500 SE, but don’t know if is long enough.
  17. Captsteve123

    Boat Lift Setup -2500 SE

    Anyone know what the distance inside dimensions need to be for the bunks of boat lift for the 2500 SE.
  18. Captsteve123

    New to Parker Family

    Sold my 2003 Pathfinder 2200V bought new to upgrade to 2022 Parker 2500 SE. Excited for the change, and family is as well.
Back
Top