I have decided to sell my boat. 2007 2310 with a 250 Yamaha 4s(728hr) 4 blade Mercury Rev 4 prop. I am asking $38,500. Since I bought it in 2012 I have only put Valvtech non-ethanol gasoline in it. PM if interested and I can send pictures via text that I took last week. Truly love the boat...
I bought a 2007 2310 about 3 years ago after searching for one for about 3 years before that! I absolutely love the 2310. I have taken the boat from in the river to 40 and 50 miles out to the big rock. I have done overnighters on the boat also fishing for the big drum in the Neuse River. Boat...
Ever since I have had my boat which is a 2007 2310 with a bracket with a 250 4s Yamaha I have had a problem with it leaning to port while underway. I usually just use the trim tabs to adjust it. I have noticed that different conditions may make it worst(current of water and direction, fuel...
When I first got my boat it had that smell in there. I wiped everything down with bleach and let it sit wide open for as long as I could on a breezy day. Smell has never come back. What I do now is hang one of those damp rid bags from my hatch on the inside everytime I leave my boat. That...
Parker2310, could you post a picture of your motor and mounting hole? I have a 2310 also and I don't really understand which holes you r referring to. Thanks
I have a 2310 Parker. I have been out and overnighted with my buddies for the big drum in the Pamlico Sound(slept 5 on the boat but only 2 in the cabin, the rest in bean bag chairs). I am about 6 ft and weigh about 185, my brother is about 6 ft. and weighs right around 200. We can get in the...
I installed them on my 2310 this year. So far so good. All I used was the backing plates. There is some flex but not that bad. My top has the hollow core material and it tells you in the instructions what to do with different tops. I went out this summer and got caught coming back in with a...
I have a 2310 also with a bracket. I have a 250 with a four blade on it. I have found as Dale has mentioned that you have to have the motor trimmed up alot. I had a 3 blade before the 4 blade and it makes no difference, the key is the trim. I also have realized that you have to give it a...
I don't know if you guys have ever tried this but, if you find a stubborn spot that will not come off. Buy some oxiclean clothes detergent and sprinkle it on the the said spot. put just enough water on it to make it like a paste. Rub around with either your fingers or a brush. I usually let...