Recent content by fishinwuf

On my 2310, the in floor box between the helm seats did not drain properly and I fussed about it until the dealer and Parker came up with a solution. In the step as you go throught the cabin door, a shower sump pump was installed and the drain routed overboard. A new drain line was installed...

If you put 2-3 full grown folks in the aft corner, yes you will get water up through the scupper. It's a function of how close the deck is to the waterline. It's one of my few peeves with the boat that I wish Parker would address. FWIW, my previous 24 Albemarle had the same problem and a...

Is that the extended cabin version with the upper control station? :wink:

I agree that the throttle placement looks a bit funky - maybe just the photo angle. Definately like the additional real estate for flush mounting electronics and the new location for the swith panel - appears to be much easier to read w/o having to look down for more than a second. Hard to be...

Browne Towles @ Fin Addict Marine in Benson can make you one out of Starboard. Either make a cardboard template and take it to him or take him the boat. Since you are making one, how about making it out of clear plexiglass?

John; Come on over - the water's fine!! 8) I know where there is a new 2005 leftover 2310 if you're interested.... :wink:

Eminent Brother (been waiting for a good opportunity to say that!!); Your 2110 will be fine in the ocean. Obviously, you need to pick your days, but I would not hesitate for a moment under good conditions. Or said another way, if it is too rough to go on your 21, it is too rough for me to go...

I do believe that is the first 2510 I have ever seen with a upper station. Who built it for you? Also, what year is your boat - looks fairly new?? Nice looking rig 8)

Daniel- Happen to recall the diameter and pitch of your 4 blade?

I have tried a few props on my 2310 w/F225 (2004 model, full transom & bracket, bottom paint, hard top, etc), trying to find that "perfect" prop. For speed, the 17" pitch Yam SWS was best, but I could not turn up the 5,500 rpm's recommended by Yam. Tried a 15" pitch SWS and that puts me right...

Thanks for the kind words. As far as the interior decorating goes, all that was really done was to re-cover the cushions and add a couple shelves. There are a few more pix in the photos section on the Yahoo site. My Mom is pretty handy with a sewing machine, so I just had to buy the...

Here is what it's all about:

Glad to see this site getting off to a good start. Here's a couple shots of my rig: