Inshore Chaser

Wow...50lbs more than your current TM (same shaft length?)? I was looking at the Instinct Quest 87" (auto deploy/stow) and that weighed...

I just got 4 bionne lithium iron batteries. Bionne said no on starting the yamaha but sent me chargers specific for them. Good luck

Following....heard Yamaha engines are not compatible for recharging lithiums. Would love to get rid of those heavy lead acid batteries!!

I close the sea cock, then where the water comes out in tbe livewell you undo the attachment and can thread a hose on there. Hose needs...

2 part West Epoxy. BTW how do you get anti-freeze into your washdown and livewell pumps?

Not sure on an SE but on my 2100 DVCC went from the cable "boot" inside the console to the pie plate just aft of the console, over the...

Add this to the screws..... ULTRA Tef-Gel PTFE anti-seize, anti-corrosion, waterproof lubricant

Most of the snaps should be on the console. Most of all the enclosures I have seen utilize "tracks" screwed to the t top for easier...

I suggest go with the local guy all the way. Most of these folks do amazing work and will far surpass the quality of a pre made.

Have your local canvas guy do it. You will pay more (guessing around $1,500 for a 3 piece, gull wings would be more)) but you will be...

I'm guessing you haven't read any of my write ups on this subject ?

The 12/6 tip makes a ton of sense....never thought of it!!

Could always put a "coffin box" with a cushion in front of the console and gain additional storage/fish hold

Windows installed, need to mount the launchers and lights and get it up on the console. Pleased with the results and hope it serves its...

Interlux perfection 2 stage rolled no tipping. 3 coats, took a bit of messing with thinner and application techniques to get it nearly...